Prediction of neutral plane and effects of the process parameters in radial forging using an upper bound solution

被引：21
|
作者：
Sanjari, M.
Taheri, A. Karimi
Ghaei, A.
机构：
[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran
[2] Sharif Univ Technol, Dept Mech Engn, Tehran, Iran
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2007年 / 186卷 / 1-3期
关键词：
radial forging; upper bound method; analysis; location of neutral plane;
D O I：
10.1016/j.jmatprotec.2006.12.029
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Radial forging is an open die forging process used for reducing the diameter of shafts, tubes and axels. In the present research, a new velocity field was developed to analyze the radial forging process by the upper bound method. The forging load was predicted by minimizing the deformation power with regards to the location of neutral plane. The accuracy of the model was verified by comparing the predicted forging loads with experimental results published by the previous researcher. A good agreement was found between the two sets of results. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：147 / 153
页数：7
相关论文
共 50 条
  • [1] A new upper bound solution for analysis of the radial forging process
    Ghaei, A.
    Taheri, A. Karimi
    Movahhedy, M. R.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2006, 48 (11) : 1264 - 1272
  • [2] Upper bound analysis of forging penetration in a radial forging process
    Wu, Yunjian
    Dong, Xianghuai
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 103 : 1 - 8
  • [3] An upper bound solution of axial metal flow in cold radial forging process of rods
    Wu, Yunjian
    Dong, Xianghuai
    Yu, Qiong
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, 85 : 120 - 129
  • [4] An upper bound solution of forging load in cold radial forging process of rectangular cross-section billet
    Xiao Yang
    Xianghuai Dong
    Yunjian Wu
    The International Journal of Advanced Manufacturing Technology, 2017, 92 : 2765 - 2776
  • [5] An upper bound solution of forging load in cold radial forging process of rectangular cross-section billet
    Yang, Xiao
    Dong, Xianghuai
    Wu, Yunjian
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (5-8): : 2765 - 2776
  • [6] A LOWER BOUND SOLUTION FOR THE PLANE-STRAIN EXTRUSION FORGING PROCESS
    HASHMI, MSJ
    MATHEMATICAL AND COMPUTER MODELLING, 1988, 11 : 1183 - 1188
  • [7] Upper bound analysis of axial metal flow inhomogeneity in radial forging process
    Wu, Yunjian
    Dong, Xianghuai
    Yu, Qiong
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 93 : 102 - 110
  • [8] PLANE STRAIN FORGING - A LOWER UPPER BOUND APPROACH
    NAGPAL, V
    CLOUGH, WR
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1975, 97 (01): : 119 - 124
  • [9] An upper bound model with continuous velocity field for strain inhomogeneity analysis in radial forging process
    Wu, Yunjian
    Dong, Xianghuai
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 115 : 385 - 391
  • [10] AN UPPER BOUND METHOD FOR COMPUTING LOADS AND FLOW PATTERNS IN PLANE-STRAIN FORGING PROCESS
    OUDIN, J
    RAVALARD, Y
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1981, 21 (3-4): : 237 - 250
12345