Morphology of polyethylene blended with thermotropic hydroxyethyl cellulose acetate

被引:0
|
作者
Chen, JM
Huang, Y [1 ]
Wang, HL
Shen, JR
机构
[1] Chinese Acad Sci, Guangzhou Inst Chem, Lab Cellulose & Ligoncellulos Chem, Guangzhou 510650, Peoples R China
[2] S China Univ Technol, Dept Polymer Mat Sci & Engn, Guangzhou 510641, Peoples R China
关键词
polyethylene; thermotropic hydroxyethyl cellulose acetate; blend; morphology;
D O I
10.1002/(SICI)1097-4628(19980214)67:7<1285::AID-APP19>3.0.CO;2-0
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Morphology of low-density polyethylene (PE)/thermotropic hydroxyethyl cellulose acetate (HECA) blends, and the melting and crystallization behavior of PE in the blends were studied. The "sea island" morphology was observed in PE/HECA blends. The process of melting and crystallization of PE in blends was independent of the HECA fraction when the PE fraction was larger than 50 wt %. When the PE fraction is smaller than 20 wt %, however, multiple crystallization was observed in the low temperature region. HECA was incompatible with PE crystals in the blends, but partially compatible with the amorphous part of PEI HECA could exist between the PE lamellae in PE spherulites, and concentric ring morphology was observed in spherulites. (C) 1998 John Wiley & Sons, Inc.
引用
收藏
页码:1285 / 1291
页数:7
相关论文
共 50 条
  • [41] Melt die-swell behavior of polyoxymethylene blended with ethylene-vinyl acetate copolymer and high-density polyethylene
    Liang, Ji-Zhao
    POLYMER TESTING, 2018, 68 : 213 - 218
  • [42] Fabrication of tethered carbon nanotubes in cellulose acetate/polyethylene glycol-400 composite membranes for reverse osmosis
    Sabir, Aneela
    Shafiq, Muhammad
    Islam, Atif
    Sarwar, Afsheen
    Dilshad, Muhammad Rizwan
    Shafeeq, Amir
    Butt, Muhammad Taqi Zahid
    Jamil, Tahir
    CARBOHYDRATE POLYMERS, 2015, 132 : 589 - 597
  • [43] Characterization and some properties of cellulose acetate-co-polyethylene oxide blends prepared by the use of gamma irradiation
    Kamal, H.
    Abd-Elrahim, F. M.
    Lotfy, S.
    JOURNAL OF RADIATION RESEARCH AND APPLIED SCIENCES, 2014, 7 (02) : 146 - 153
  • [44] Polyethylene cellulose nanofibrils nanocomposites
    Silveira Maia, Thiago Henrique
    Larocca, Nelson Marcos
    Goncalves Beatrice, Cesar Augusto
    Junior de Menezes, Aparecido
    Siqueira, Gilberto de Freitas
    Pessana, Luiz Antonio
    Dufresne, Alain
    Franca, Marcos Pini
    Lucas, Alessandra de Almeida
    CARBOHYDRATE POLYMERS, 2017, 173 : 50 - 56
  • [45] Degradation kinetics of waste blended polyethylene films
    Srivastava, D
    Nagpal, AK
    Mathur, GN
    JOURNAL OF POLYMER MATERIALS, 1996, 13 (04): : 289 - 291
  • [46] Solution casting of cellulose acetate films: influence of surface substrate and humidity on wettability, morphology and optical properties
    Kramar, Ana
    Ortega, Irene Rodriguez
    Gonzalez-Gaitano, Gustavo
    Gonzalez-Benito, Javier
    CELLULOSE, 2023, 30 (04) : 2037 - 2052
  • [47] Influence of Natural Fillers on Thermal and Mechanical Properties and Surface Morphology of Cellulose Acetate-Based Biocomposites
    Spanic, Nikola
    Jambrekovic, Vladimir
    Sernek, Milan
    Medved, Sergej
    INTERNATIONAL JOURNAL OF POLYMER SCIENCE, 2019, 2019
  • [48] Preparation, characterization of nano ZnO-blended cellulose acetate-polyurethane membrane for photocatalytic degradation of dyes from water
    Rajeswari, A.
    Vismaiya, S.
    Pius, Anitha
    CHEMICAL ENGINEERING JOURNAL, 2017, 313 : 928 - 937
  • [49] Solution casting of cellulose acetate films: influence of surface substrate and humidity on wettability, morphology and optical properties
    Ana Kramar
    Irene Rodríguez Ortega
    Gustavo González-Gaitano
    Javier González-Benito
    Cellulose, 2023, 30 : 2037 - 2052
  • [50] Study of rheological Behavior of hydrophobically modified hydroxyethyl cellulose
    Li, Q
    Ye, L
    Cai, Y
    Huang, RH
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 100 (04) : 3346 - 3352