The analysis of reasons for defects formation in aluminum joints created using RFSSW technology

被引：18
作者：
Adamus, Janina [1 ]
Adamus, Konrad [1 ]
机构：
[1] Czestochowa Tech Univ, Ul JH Dabrowskiego 69, PL-42201 Czestochowa, Poland
来源：
MANUFACTURING LETTERS | 2019年 / 21卷
关键词：
Aluminum alloys; Defects; Load bearing capacity; Refill friction stir spot welding; RFSSW;
D O I：
10.1016/j.mfglet.2019.08.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper describes and classifies defects in aluminum joints made using refill friction stir spot welding (RFSSW) technology, which has potential for replacing riveting as a default joining technology in aviation. Three defect groups were distinguished: at the sleeve-plunger interface, between the sheets and in the joint axis. The failure modes by fracture around a weld in the top and the bottom sheets, by rupture between the sheets were presented. The progression of defects at the sleeve-plunger interface due to deteriorating process conditions was shown. The RFSSW joints were compared to the riveted joints applied in the actual airplane structures. (C) 2019 Society of Manufacturing Engineers (SME). Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：35 / 40
页数：6
相关论文
共 32 条
[1]  
Adamus K., 2018, THEORETICAL EXPT ANA
[2]   Ultrasonic testing of thin walled components made of aluminum based laminates [J].
Adamus, Konrad ;
Adamus, Janina ;
Lacki, Janusz .
COMPOSITE STRUCTURES, 2018, 202 :95-101
[3]   Advances in NDT and materials characterization by eddy currents [J].
Almeida, G. ;
Gonzalez, J. ;
Rosado, L. ;
Vilaca, P. ;
Santos, Telmo G. .
FORTY SIXTH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2013, 2013, 7 :359-364
[4]   Microstructure, texture and mechanical properties during refill friction stir spot welding of 6061-T6 alloy [J].
Cao, J. Y. ;
Wang, M. ;
Kong, L. ;
Zhao, H. X. ;
Chai, P. .
MATERIALS CHARACTERIZATION, 2017, 128 :54-62
[5]   Characterization of TIG and FSW weldings in cast ZE41A magnesium alloy [J].
Carlone, P. ;
Palazzo, G. S. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 215 :87-94
[6]  
Davis J.R., 2010, Aluminum and aluminum alloys
[7]   Investigation of geometrical features on mechanical properties of AA2198 refill friction stir spot welds [J].
de Castro, Camila Caroline ;
Plaine, Athos Henrique ;
Dias, Gabriel Pietta ;
de Alcantara, Nelson Guedes ;
dos Santos, Jorge Fernandez .
JOURNAL OF MANUFACTURING PROCESSES, 2018, 36 :330-339
[8]   Taguchi approach for the optimization of refill friction stir spot welding parameters for AA2198-T8 aluminum alloy [J].
de Castro, Camila Caroline ;
Plaine, Athos Henrique ;
de Alcantara, Nelson Guedes ;
dos Santos, Jorge Fernandez .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (5-8) :1927-1936
[9]   Applying a nonlinear, pitch-catch, ultrasonic technique for the detection of kissing bonds in friction stir welds [J].
Delrue, Steven ;
Tabatabaeipour, Morteza ;
Hettler, Jan ;
Van Den Abeele, Koen .
ULTRASONICS, 2016, 68 :71-79
[10]   Optimizing weld quality of a friction stir welded aluminum alloy [J].
Doude, H. ;
Schneider, J. ;
Patton, B. ;
Stafford, S. ;
Waters, T. ;
Varner, C. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 222 :188-196
1234