Fracture toughness of 304L austenitic stainless steel produced by laser powder b e d fusion

被引：32
|
作者：
Kumar, Punit [1 ]
Zhu, Zhiguang [2 ]
Nai, Sharon M. L. [2 ]
Narayan, R. L. [3 ]
Ramamurty, U. [1 ,4 ]
机构：
[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore 639798, Singapore
[2] Singapore Inst Mfg Technol, 73 Nanyang Dr, Singapore 637662, Singapore
[3] Indian Inst Technol, Dept Mat Sci & Engn, New Delhi 110016, India
[4] ASTAR, Inst Mat Res & Engn, Singapore 138634, Singapore
来源：
SCRIPTA MATERIALIA | 2021年 / 202卷
关键词：
Additive manufacturing; Austenitic steels; Fracture; Toughness; Martensitic phase transformation; MECHANICAL-PROPERTIES; PHASE-TRANSFORMATION; HARDENING BEHAVIOR; HEAT-TREATMENT; STRENGTH; MICROSTRUCTURE; TEMPERATURE; MARTENSITE; ENERGY;
D O I：
10.1016/j.scriptamat.2021.114002
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Uniaxial tensile response and J integral-resistance behavior of 304L austenitic stainless steel manufactured by laser powder bed fusion process (LPBF) were investigated. The steel undergoes transformation induced plasticity (TRIP) at room temperature, resulting in high fracture toughness (J(Q)) values combined with high strength (sigma(Y)) and ductility. Upon increasing the temperature to 75 degrees C, TRIP becomes inactive, and the deformation mechanism is dominated by dislocation glide and twinning. This leads to a substantial reduction in J(Q) and marked anisotropy, while sigma(Y) remains unchanged. Significance of these results in terms of fracture properties of steels manufactured via LPBF processes is discussed. (c) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Spark Plasma Welding of Austenitic Stainless Steel AISI 304L to Commercially Pure Titanium
    Kumar, N. Naveen
    Ram, G. D. Janaki
    Bhattacharya, S. S.
    Dey, H. C.
    Albert, S. K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 : S289 - S297
  • [22] Effect of martensitic transformation on springback behavior of 304L austenitic stainless steel
    Fathi, H.
    Semnani, H. R. Mohammadian
    Emadoddin, E.
    Sadeghi, B. Mohammad
    MATERIALS RESEARCH EXPRESS, 2017, 4 (09):
  • [23] Experimental investigation on the deformation behavior of an isotropic 304L austenitic steel manufactured by laser powder bed fusion with hot isostatic pressing
    Zhang, Hongzhuang
    Li, Bing
    Hu, Jiexin
    Qian, Guian
    Li, Changyou
    MATERIALS CHARACTERIZATION, 2024, 214
  • [24] Effect of laser power on hydrogen embrittlement and microstructural evolution in selective laser melted 304L austenitic stainless steel
    Zhou, Chilou
    Yan, Xinrui
    Long, Yulin
    Chen, Junyang
    Li, Xinfeng
    Li, Xiang
    CORROSION SCIENCE, 2025, 249
  • [25] Anisotropy in Microstructure and Impact Toughness of 316L Austenitic Stainless Steel Produced by Selective Laser Melting
    Zong Xuewen
    Liu Wenjie
    Yang Yumeng
    Zhang Shuzhe
    Chen Zhen
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (12) : 4031 - 4040
  • [26] Effect of low temperature on hydrogen-assisted crack propagation in 304L/308L austenitic stainless steel fusion welds
    Jackson, H. F.
    San Marchi, C.
    Balch, D. K.
    Somerday, B. P.
    CORROSION SCIENCE, 2013, 77 : 210 - 221
  • [27] MECHANICAL STRENGTH EVALUATION OF PULSED ND-YAG LASER WELDING OF AUSTENITIC STAINLESS STEEL 304L
    Tahami, F. Vakili
    Safari, E.
    Khosroshahi, H. Halimi
    INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2019, 10 (01): : 143 - 148
  • [28] Hot isostatic pressing of laser powder-bed-fused 304L stainless steel under different temperatures
    Zhang, Hongzhuang
    Li, Changyou
    Yao, Guo
    Zhang, Yimin
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022, 226
  • [29] Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing
    Laghi, Vittoria
    Palermo, Michele
    Tonelli, Lavinia
    Gasparini, Giada
    Ceschini, Lorella
    Trombetti, Tomaso
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (9-10) : 3693 - 3705
  • [30] Friction stir processing of austenitic stainless steel cold spray coating deposited on 304L stainless steel substrate: feasibility study
    Perard, Thomas
    Sova, Alexey
    Robe, Hugo
    Robin, Vincent
    Zedan, Yasser
    Bocher, Philippe
    Feulvarch, Eric
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (7-8) : 2379 - 2393
12345