Influence of the availability of calcium on the hydration of tricalcium aluminate (C3A) in seawater-mixed C3A-gypsum system

This work examined the effects of seawater (SW) on the hydration of tricalcium aluminate (C(3)A) in C(3)A-gypsum and C(3)A-gypsum-Ca(OH)(2) systems through the characterization of hydration heat release, the evolution of aqueous phase composition and hydration products with the hydration time. It was found that SW increased the dissolution driving force of C(3)A and solubility of gypsum, which accelerated the early hydration of C(3)A and the formation of ettringite (AFt), leading to a higher hydration degree of C(3)A at an early age compared with the deionized (DI) water-mixed pastes. After gypsum depletion to form AFt, and in the absence of Ca(OH)(2), the formation of chloroaluminate hydrates was slower due to the insufficient Ca resulted in an accumulation of Al in solution. This would delay the subsequent transformation of AFt to monosulfate (SO4-AFm) and the formation of hydrogarnet (C(3)AH(6)), which would further reduce the hydration degree of the C(3)A at the later ages. However, in the presence of Ca(OH)(2), the hydration degree of C(3)A-gypsum-Ca(OH)(2) at later ages was increased, which was similar to that of the corresponding DI pastes. This can be inferred that the amount of Ca available in SW-mixed cement concrete can affect the hydration degree of C(3)A in cement.