The properties of free-form laser-consolidated Stellite 6 alloy

被引:0
作者
Xue, L [1 ]
Chen, JY [1 ]
Islam, MU [1 ]
机构
[1] Natl Res Council Canada, Integrated Mfg Technol Inst, London, ON N6G 4X8, Canada
来源
ICALEO (R)'99: PROCEEDING OF THE LASER MATERIALS PROCESSING CONFERENCE, VOL 87, PTS 1 AND 2 | 2000年 / 87卷
关键词
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Free-form laser consolidation of Go-base Stellite 6 alloy has been investigated. The Stellite 6 components built up by the process are metallurgically sound, without cracks and porosity. The laser-consolidated (LC) Stellite 6 is harder, stronger and even more ductile than the respective material produced by either casting or the powder metallurgy method. The tensile strength of the material is about 1245-1360 MPa, which is about 50% higher than that of the cast or powder metallurgy Stellite 6. The hardness of the LC Stellite 6 is about Re 58-59, while only about Re 37-46 can be obtained for the same material through the casting or powder metallurgy method. The LC Stellite 6 shows substantially higher yield strength and slightly higher elongation than the cast or powder metallurgy Stellite 6. The excellent mechanical properties of the LC Stellite 6 can be attributed to its exceptionally fine columnar dendrite microstructure produced by the rapid solidification associated with the process. The material was examined in detail by optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) and Auger electron microscopy (AES). The electrochemical polarization curve of the LC Stellite 6 in 3.5% NaCl solution was also measured and compared with other materials.
引用
收藏
页码:F172 / F181
页数:4
相关论文
共 50 条
[31]   Characteristics and bonding behavior of Stellite 6 alloy coating processed with supersonic laser deposition [J].
Yao, Jianhua ;
Li, Zhihong ;
Li, Bo ;
Yang, Lijing .
Journal of Alloys and Compounds, 2016, 661 :526-534
[32]   Effect of Solution Treatment on the Performance of Laser Cladding of Stellite6 Alloy Coating [J].
Li, Li ;
Sun, Feng ;
Zhang, Yao-Cheng .
Surface Technology, 2017, 46 (01) :78-81
[33]   Using geometric properties of correspondence vectors for the registration of free-form shapes [J].
Liu, YH ;
Rodrigues, MA ;
Cooper, D .
15TH INTERNATIONAL CONFERENCE ON PATTERN RECOGNITION, VOL 1, PROCEEDINGS: COMPUTER VISION AND IMAGE ANALYSIS, 2000, :1011-1014
[34]   Grid Optimization of Free-Form Spatial Structures Considering the Mechanical Properties [J].
Liu, Fengcheng ;
Xu, Tao ;
Chan, Yung William Sasy ;
Tsavdaridis, Konstantinos Daniel .
BUILDINGS, 2024, 14 (10)
[35]   Novel free-form surface 3D laser scanning system [J].
Automation Research Center, Dalian Maritime University, Dalian 116026, China .
Jixie Gongcheng Xuebao, 2009, 11 (260-265+270) :260-265+270
[36]   Multiple material solid free-form fabrication by selective area laser deposition [J].
Jakubenas, K.J. ;
Sanchez, J.M. ;
Marcus, H.L. .
Materials and Design, 1998, 19 (1-2) :11-18
[37]   Algorithm and Implementation of Laser Cladding with Equal Overlapping Ratio on Free-Form Surface [J].
Su Hao ;
Shi Tuo ;
Shi Shihong ;
Fu Geyan .
CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2020, 47 (04)
[38]   Design and production of fixtures for free-form components using selective laser sintering [J].
Violante, Maria Grazia ;
Iuliano, Luca ;
Minetola, Paolo .
RAPID PROTOTYPING JOURNAL, 2007, 13 (01) :30-37
[39]   Multiple material solid free-form fabrication by selective area laser deposition [J].
Jakubenas, KJ ;
Sanchez, JM ;
Marcus, HL .
MATERIALS & DESIGN, 1998, 19 (1-2) :11-18
[40]   Automated Inspection of Gaps on the Free-form Shape parts by Laser Scanning Technologies [J].
Zhou, Sen ;
Xu, Jian ;
Tao, Lei ;
An, Lu ;
Yu, Yan .
2017 INTERNATIONAL CONFERENCE ON OPTICAL INSTRUMENTS AND TECHNOLOGY - OPTOELECTRONIC MEASUREMENT TECHNOLOGY AND SYSTEMS, 2017, 10621