共 50 条
Effects of particle shape and swirling intensity on elbow erosion in dilute-phase pneumatic conveying
被引:60
|作者:
Zhou, Jia-wei
[1
]
Liu, Yu
[2
]
Liu, Song-yong
[1
]
Du, Chang-long
[1
]
Li, Jian-ping
[1
]
机构:
[1] China Univ Min & Technol, Sch Mechatron Engn, Xuzhou 221116, Jiangsu, Peoples R China
[2] Henan Polytech Univ, Sch Mech & Power Engn, Jiaozuo 454000, Henan, Peoples R China
来源:
关键词:
Elbow erosion;
Particle shape;
Swirling intensity;
Elbow direction;
CFD-DEM;
Dilute phase pneumatic conveying;
NUMERICAL-SIMULATION;
NONSPHERICAL PARTICLES;
PRACTICAL ESTIMATION;
PRESSURE-DROP;
SOLID FLOW;
DEM-CFD;
MODEL;
BENDS;
GAS;
IMPACT;
D O I:
10.1016/j.wear.2017.03.009
中图分类号:
TH [机械、仪表工业];
学科分类号:
0802 ;
摘要:
Elbow erosion, which is mainly caused by collisions between particles and wall, is a prominent problem encountered in dilute-phase pneumatic conveying systems. The particle shape and air-flow regime markedly influence the particle-wall collision characteristics through the ambiguous impacts of both the geometric boundary and relative velocity. This paper numerically investigates the effects of particle shape and swirling intensity on elbow erosion in dilute-phase pneumatic conveying using the CFD-DEM method. Initially, the non-spherical particles are modelled based on polyhedrons and scanned real coal particles, and their morphologies are characterized according to sphericity. Subsequently, the calculation compatibility of attrition models based on CFD-DEM simulation is calibrated by comparing the erosion rates calculated on the basis of different classical models. In addition, the compatibility of the selected model for the coarse particle pneumatic conveying is verified via experimental measurements. Based on the two-way coupled Eulerian-Lagrangian method, simulations of the gas-solid flow that consider the elbow direction, particle shape, and swirling intensity are performed, and the correlation models with sphericity and swirling number for different elbow directions are assessed. In general, it is found that the elbow direction affects the magnitude, distribution, and position of the maximum of the erosion rate. The mean erosion rate generally varies with the particle sphericity in a nearly inclined S pattern in all elbow directions. The mean erosion rate evidently decreases with swirling number first quickly and then slowly. To develop a modified predictive model based on the classical erosion model, the polynomial and the Exp3p2 exponential function are adopted to fit the influences of particle shape and swirling intensity, respectively. The fitting deviations agree reasonably well with the calculation results. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:66 / 77
页数:12
相关论文