Optimization of Process Parameter of Brass Butt Joint Using Brazing Process

被引:0
作者
Venkateswaran, Sriram [1 ]
Ajithkumar [1 ]
Fazil, Shaik [1 ]
Balakrishnan, Kanimozhi [1 ]
机构
[1] Sathyabama Inst Sci & Technol, Dept Mech Engn, Chennai, Tamil Nadu, India
来源
3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020) | 2020年 / 2311卷
关键词
WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; BEAM;
D O I
10.1063/5.0034395
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Brazing is a metal joining process in which two or more metal specimens are joined together by melting and flowing a filler metal into the joint than the adjoining metal. The filler metal is brought slightly above its melting temperature while protected by a suitable atmosphere. The brazing processes are done with 18 brass specimens, where each pair of plates is joined together by butt joint method. Brazed brass 319 joints are tested for the tensile and impact strength. The main purpose of this work is to optimize the parameters in brazing process using Taguchi optimization method. The obtained result will be used in brazing industries to join the brass plates.
引用
收藏
页数:7
相关论文
共 50 条
[41]   Mechanical properties and microstructure of the C70600 copper-nickel alloy and C46500 brass joint using brazing technique [J].
Mehdikhani, Hesam ;
Mostafapour, Amir ;
Binesh, Behzad .
JOURNAL OF ADVANCED JOINING PROCESSES, 2025, 11
[42]   Mechanical properties and microstructure analysis of welding-brazing of Al/ti butt joint with Zn foil additive [J].
Xu, Chuan ;
Peng, Cheng .
MATERIALS RESEARCH EXPRESS, 2020, 7 (02)
[43]   Butt brazing of titanium alloys/stainless steel plates by MIG-TIG double-sided arc welding process with copper filler metal [J].
Cheng, Zhi ;
Huang, Jihua ;
Ye, Zheng ;
Yang, Jian ;
Chen, Shuhai .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (01) :1566-1570
[44]   Lap weld-brazing of aluminium to steel using novel cold metal transfer process [J].
Singh, Jaivindra ;
Arora, Kanwer Singh ;
Shukla, Dinesh Kumar .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 283
[45]   Experimental investigation and optimization of the FDM process using PLA [J].
Sahoo S. ;
Sutar H. ;
Senapati P. ;
Shankar Mohanto B. ;
Ranjan Dhal P. ;
Kumar Baral S. .
Materials Today: Proceedings, 2023, 74 :843-847
[46]   A method for process parameter optimization of simultaneous double-sided friction stir welding using a heat transfer model [J].
Meng, Shaofei ;
Liu, Haitao ;
Xiao, Juliang ;
Huang, Tian ;
Ni, Yanbing ;
Sun, Shixuan .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (5-6) :3747-3758
[47]   Influence of Flux Coating During Dissimilar Welding of Copper with Brass Using ATIG Welding Process [J].
Satyanarayana, J. Durga Venkata ;
Srinivasan, Raghuraman ;
Ramamoorthi, Venkatraman ;
Pichumani, Sivachidambaram ;
Srikar, B. Kamesh .
ADVANCES IN MANUFACTURING TECHNOLOGY, 2019, :95-103
[48]   Effects of different powders on themicro-gap laser welding-brazing of an aluminium-steel butt joint using a coaxial feeding method [J].
Zhang, Yi ;
Li, Funan ;
Guo, Guanlin ;
Wang, Gang ;
Wei, Haiying .
MATERIALS & DESIGN, 2016, 109 :10-18
[49]   Prediction and optimization of process parameters of green composites in AWJM process using response surface methodology [J].
Jagadish ;
Bhowmik, Sumit ;
Ray, Amitava .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (5-8) :1359-1370
[50]   Optimization of process parameters on engine exhaust valves using Taguchi method in friction welding process [J].
Nagasankar, P. ;
Gurusamy, P. ;
Gopinath, S. ;
Gnanaprakash, K. ;
Pradeep, G. .
MATERIALS TODAY-PROCEEDINGS, 2020, 33 :3212-3217