Bending moment resistance of dowel corner joints in case-type furniture under diagonal compression load

We investigated bending moment resistance under diagonal compression load of corner doweled joints with plywood members. Joint members were made of 11-ply hardwood plywood of 19 mm thickness. Dowels were fabricated of Beech and Hornbeam species. Their diameters (6, 8 and 10 mm) and depths of penetration (9, 13 and 17 mm) in joint members were chosen variables in our experiment. By increasing the connector's diameter from 6 to 8 mm, the bending moment resistance under diagonal compressive load was increased, while it decreased when the diameter was increased from 8 to 10 mm. The bending moment resistance under diagonal compressive load was increased by increasing the dowel's depth of penetration. Joints made with dowels of Beech had higher resistance than dowels of Hornbeam. Highest resisting moment (45.18 N.m) was recorded for joints assembled with 8 mm Beech dowels penetrating 17 mm into joint members Lowest resisting moment (13.35 N.m) was recorded for joints assembled with 6 mm Hornbeam dowels and penetrating 9 mm into joint members.