Effects of hygrothermal aging on the molar mass and thermal properties of recycled poly(ethylene terephthalate) and its short glass fibre composites

被引:46
|
作者
Pegoretti, A [1 ]
Penati, A [1 ]
机构
[1] Univ Trent, Dept Mat Engn & Ind Technol, I-38050 Trento, Italy
关键词
PET; hygrothermal aging; molar mass; thermal properties;
D O I
10.1016/j.polymdegradstab.2004.05.002
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
This paper reports on the effects of hygrothermal aging at 70 degreesC in water, and at 80% relative humidity, on the molar mass and thermal properties of recycled poly(ethylene terephthalate) and its short glass fibre composites. During the initial period of exposure, water uptake increases linearly with the square root of time and apparent diffusivity decreases as fibre content increases and as relative humidity decreases. Samples exposed to 80% RH reach an equilibrium water content, while samples immersed in water do not. Composites absorb more water than expected on the basis of matrix sorption behaviour, thus suggesting that other mechanisms, like capillarity and/or transport by microcracks, are active. The observed molar mass decrease has been successfully modelled as a pseudo first-order reaction whose rate constant depends on the humidity conditions. Due to a chemicrystallization process the crystallinity of rPET and its composites increases during aging. The glass transition temperature, as measured on the second DSC scan, depends on the number-average molar mass reached during hygrothermal aging. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:233 / 243
页数:11
相关论文
共 50 条
  • [1] Recycled poly(ethylene terephthalate) and its short glass fibres composites: effects of hygrothermal aging on the thermo-mechanical behaviour
    Pegoretti, A
    Penati, A
    POLYMER, 2004, 45 (23) : 7995 - 8004
  • [2] Glass fibre recycled poly(ethylene terephthalate) composites: mechanical and thermal properties
    Giraldi, ALFD
    Bartoli, JR
    Velasco, JI
    Mei, LHI
    POLYMER TESTING, 2005, 24 (04) : 507 - 512
  • [3] EFFECTS OF HYDROLYSIS ON THE PHYSICAL PROPERTIES OF SHORT GLASS-FIBRE REINFORCED POLY(ETHYLENE TEREPHTHALATE).
    Haworth, Barry
    Walsh, Geraldine M.
    1600, (17):
  • [4] Effects of hygrothermal aging and a silane coupling agent on the tensile properties of injection molded short glass fiber reinforced poly(butylene terephthalate) composites
    Ishak, ZAM
    Ariffin, A
    Senawi, R
    EUROPEAN POLYMER JOURNAL, 2001, 37 (08) : 1635 - 1647
  • [5] Mechanical and Thermal Properties of Recycled Poly(ethylene terephthalate) Reinforced Newspaper Fiber Composites
    Ardekani, Sara Madadi
    Dehghani, Alireza
    Al-Maadeed, Mariam A.
    Wahit, Mat Uzir
    Hassan, Azman
    FIBERS AND POLYMERS, 2014, 15 (07) : 1531 - 1538
  • [6] Mechanical and thermal properties of recycled poly(ethylene terephthalate) reinforced newspaper fiber composites
    Sara Madadi Ardekani
    Alireza Dehghani
    Mariam A. Al-Maadeed
    Mat Uzir Wahit
    Azman Hassan
    Fibers and Polymers, 2014, 15 : 1531 - 1538
  • [7] Effects of hygrothermal aging on the fracture and failure behavior in short glass fiber-reinforced, toughened poly(butylene terephthalate) composites
    Univ Kaiserslautern, Kaiserslautern, Germany
    Polym Compos, 6 (900-909):
  • [8] Effects of hygrothermal aging on the fracture and failure behavior in short glass fiber-reinforced, toughened poly(butylene terephthalate) composites
    Czigany, T
    Ishak, ZAM
    Heitz, T
    KargerKocsis, J
    POLYMER COMPOSITES, 1996, 17 (06) : 900 - 909
  • [9] An Investigation on the Rheology, Morphology, Thermal and Mechanical Properties of Recycled Poly (ethylene terephthalate) Reinforced With Modified Short Glass Fibers
    Rezaeian, I.
    Jafari, S. H.
    Zahedi, P.
    Nouri, S.
    POLYMER COMPOSITES, 2009, 30 (07) : 993 - 999
  • [10] Shout glass fibre reinforced poly(butylene terephthalate) - Part 2 - Effect of hygrothermal aging on mechanical properties
    Ishal, ZAM
    Mansor, TSAT
    Yow, BN
    Ishiaku, US
    Karger-Kocsis, J
    PLASTICS RUBBER AND COMPOSITES, 2000, 29 (06) : 271 - 277