Stress intensity factors of a corner crack emanating from a pinhole of a solid cylinder

被引：12

作者：

Joseph, R. P. ^{[1
]}

Purbolaksono, J. ^{[1
]}

Liew, H. L. ^{[1
]}

Ramesh, S. ^{[1
]}

Hamdi, M. ^{[1
]}

机构：

[1] Univ Malaya, Dept Mech Engn, Ctr Adv Mfg & Mat Proc, Fac Engn, Kuala Lumpur 50603, Malaysia

来源：

ENGINEERING FRACTURE MECHANICS | 2014年 / 128卷

关键词：

Fatigue crack growth; Corner crack; Boundary element method; Stress intensity factor; ROUND BARS; SURFACE CRACKS; GROWTH SIMULATION; FATIGUE GROWTH; TENSION; TORSION;

D O I：

10.1016/j.engfracmech.2014.07.021

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper presents stress intensity factors (SIFs) and fatigue growth analyses of a corner crack emanating from a pinhole of a cylinder under cyclic tension. No such work has been reported in the literature. Stress intensity factors for different crack aspect ratios and pinhole sizes in different diameters of solid cylinder are presented. A larger SIF was found at the smaller crack size of a or c in a larger diameter of a pinhole of the smaller-diameter cylinder. Crack growths at the pinhole edge were found to be faster than those at the cylinder edge. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：1 / 7

页数：7

共 50 条

[41] Evaluation of stress intensity factors from stress concentration factors for a crack embedded in dissimilar elliptic inclusion
Chen, Y. Z.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2016, 84 : 177 - 182
[42] Stress intensity factors of corner cracks at set-in nozzle-cylinder intersection of a PWR reactor pressure vessel
Murtaza, Usman Tariq
Hyder, M. Javed
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (02) : 601 - 611
[43] Closed form stress intensity factors for a semi-elliptical crack in a thick-walled cylinder under thermal stress
Shahani, AR
Nabavi, SM
INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (08) : 926 - 933
[44] K3D - A program for determining stress intensity factors of surface and corner cracks from a hole
Zhao, W
Sutton, MA
Newman, JC
FATIGUE AND FRACTURE MECHANICS: 28TH VOL, 1997, 1321 : 656 - 670
[45] Stress intensity factors of surface crack with undulated front
Kamaya, Masayuki
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2006, 49 (04) : 529 - 535
[46] Stress Intensity Factors of a Crack on the Interface of Adhesive and Adherents
Zhang, Yu
Noda, Nao-Aki
Lan, Xin
Takaisi, Ken-Tarou
ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, 2011, 452-453 : 249 - 252
[47] Stress intensity factors and crack interaction in adjacent holes
de Rijck, JJM
Fawaz, SA
ENGINEERING FRACTURE MECHANICS, 2001, 68 (07) : 963 - 969
[48] Stress Intensity Factor Solution for a Naturally Emanating Crack Out of a V-Notched Round Bar
Kumar, S. Suresh
Prakash, Raghu V.
INTERNATIONAL JOURNAL FOR COMPUTATIONAL METHODS IN ENGINEERING SCIENCE & MECHANICS, 2015, 16 (05) : 301 - 312
[49] Analytical calculation of stress intensity factors for cracks emanating from a quasi-square hole in an infinite plane
Ghajar, Rahmatollah
Hajimohamadi, Mojtaba
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 99 : 71 - 78
[50] KI of a circumferential crack emanating from an ellipsoidal cavity obtained by the crack tip stress method in FEM
Nisitani, H
Teranishi, T
ENGINEERING FRACTURE MECHANICS, 2004, 71 (4-6) : 579 - 585

← 1 2 3 4 5 →