Stress intensity factors of a corner crack emanating from a pinhole of a solid cylinder

被引：12

作者：

Joseph, R. P. ^{[1
]}

Purbolaksono, J. ^{[1
]}

Liew, H. L. ^{[1
]}

Ramesh, S. ^{[1
]}

Hamdi, M. ^{[1
]}

机构：

[1] Univ Malaya, Dept Mech Engn, Ctr Adv Mfg & Mat Proc, Fac Engn, Kuala Lumpur 50603, Malaysia

来源：

ENGINEERING FRACTURE MECHANICS | 2014年 / 128卷

关键词：

Fatigue crack growth; Corner crack; Boundary element method; Stress intensity factor; ROUND BARS; SURFACE CRACKS; GROWTH SIMULATION; FATIGUE GROWTH; TENSION; TORSION;

D O I：

10.1016/j.engfracmech.2014.07.021

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper presents stress intensity factors (SIFs) and fatigue growth analyses of a corner crack emanating from a pinhole of a cylinder under cyclic tension. No such work has been reported in the literature. Stress intensity factors for different crack aspect ratios and pinhole sizes in different diameters of solid cylinder are presented. A larger SIF was found at the smaller crack size of a or c in a larger diameter of a pinhole of the smaller-diameter cylinder. Crack growths at the pinhole edge were found to be faster than those at the cylinder edge. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：1 / 7

页数：7

共 19 条

[1] Analytical expressions for the notch stress intensity factors of periodic V-notches under tension by using the strain energy density approach [J].

Afshar, Reza ;

Berto, Filippo ;

Lazzarin, Paolo ;

Pook, Les P. .

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2013, 48 (05) :291-305

[2] Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches [J].

Berto, F. ;

Lazzarin, P. .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2014, 75 :1-48

[3] Surface cracks in notched round bars under cyclic tension and bending [J].

Carpinteri, A ;

Brighenti, R ;

Vantadori, S .

INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (03) :251-260

[4] Part-through cracks in round bars under cyclic combined axial and bending loading [J].

Carpinteri, A ;

Brighenti, R .

INTERNATIONAL JOURNAL OF FATIGUE, 1996, 18 (01) :33-39

[5] ELLIPTIC-ARC SURFACE CRACKS IN ROUND BARS [J].

CARPINTERI, A .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1992, 15 (11) :1141-1153

[6] Stress intensity factors and fatigue growth of surface cracks in notched shells and round bars: two decades of research work [J].

Carpinteri, Andrea ;

Ronchei, Camilla ;

Vantadori, Sabrina .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2013, 36 (11) :1164-1177

[7]

Caspers M., 1990, ASTM STP, P365

[8] Dual boundary element assessment of three-dimensional fatigue crack growth [J].

Cisilino, AP ;

Aliabadi, MH .

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, 2004, 28 (09) :1157-1173

[9] Comparison of DBEM and FEM crack path predictions in a notched shaft under torsion [J].

Citarella, R. ;

Cricri, G. .

ENGINEERING FRACTURE MECHANICS, 2010, 77 (11) :1730-1749

[10] Accurate stress intensity factor solutions for corner cracks at a hole [J].

Fawaz, SA ;

Andersson, B .

ENGINEERING FRACTURE MECHANICS, 2004, 71 (9-10) :1235-1254

← 1 2 →