In situ measurements of nitric oxide in coal-combustion exhaust using a sensor based on a widely tunable external-cavity GaN diode laser

A diode-laser-based sensor has been developed to measure nitric oxide mole fractions using absorption spectroscopy. The sensor is based on sum-frequency mixing of a 395 nm external-cavity diode laser (ECDL) and a 532 run laser in a beta-barium-borate crystal. Using a new tuning scheme, the GaN ECDL wavelength was modulated over 90 GHz without mode hops. The sensor was applied for measurements of the NO mole fraction in the exhaust of a laboratory-scale, 30 kW, coal-fired boiler burner. Absorption measurements were successfully performed despite severe attenuation by scattering from ash particles in the exhaust stream and on the exhaust-section windows. A detection limit (1 sigma) of 4.5 ppm m/root Hz at 700 K was demonstrated in coal-combustion exhaust at a maximum detection rate of 5 Hz. (C) 2007 Optical Society of America.