THE INFLUENCE OF ORIFICE RESTRICTION ON THE STABILITY OF RIGID ROTOR-AEROSTATIC BEARING SYSTEM

被引:0
作者
Chen, Cheng-Hsien
Yang, Ding-Wen
Kang, Yuan
Hwang, Ren-Ming
Shyr, Shrh-Shyong
机构
来源
PROCEEDINGS OF THE ASME TURBO EXPO 2009, VOL 6, PTS A AND B | 2009年
关键词
Aerostatic bearing; Reynolds equation; Stability threshold; Whirl ratio; JOURNAL BEARINGS; AIR BEARINGS; GAS; PERFORMANCE;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper has studied the influence of the restriction effect on the stability of a rigid rotor in rotation supported by double-raw, orifice compensated aerostatic bearings. The air which is assumed to be perfect gas, passes through orifice restrictor into the bearing clearance undergoing the adiabatic process is governed by Reynolds equation including the coupled effects of wedge due to spindle rotation and squeezed film due to journal oscillation. The Ph-method is used to analyze Reynolds equation and which is then solved by the finite difference method and numerical integration to yield static and dynamic characteristics of air film. The motion equation of the rotor-bearing system is obtained by using the perturbation method and the eigensolution method is used to determine the stability threshold and critical whirl ratio. The variations of stability threshold of both critical inertial force and critical whirl ratio with restriction parameters are analyzed for various whirl ratios, speed of journal rotation and eccentricity ratios.
引用
收藏
页码:909 / 917
页数:9
相关论文
共 13 条
[1]   An experimental study of high-speed rotor supported by air bearings: test RIG and first experimental results [J].
Belforte, Guido ;
Raparelli, Terenziano ;
Viktorov, Vladimir ;
Trivella, Andrea ;
Colombo, Federico .
TRIBOLOGY INTERNATIONAL, 2006, 39 (08) :839-845
[2]   A STUDY ON THE CHARACTERISTICS OF EXTERNALLY PRESSURIZED AIR BEARINGS [J].
HAN, DC ;
PARK, SS ;
KIM, WJ ;
KIM, JW .
PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1994, 16 (03) :164-173
[3]   Effects of operating conditions and supply hole diameter on the performance of a rectangular aerostatic bearing [J].
Kassab, SZ ;
Noureldeen, EM ;
Shawky, MA .
TRIBOLOGY INTERNATIONAL, 1997, 30 (07) :533-545
[4]  
KAZIMIERSKI Z, 1980, T ASME, V102, P59
[5]   Performance analysis of high-speed spindle aerostatic bearings [J].
Lo, CY ;
Wang, CC ;
Lee, YH .
TRIBOLOGY INTERNATIONAL, 2005, 38 (01) :5-14
[6]  
Lund J. W., 1967, ASME J LUBR TECHNOL, V89, P154
[7]  
LUND JW, 1964, T ASME, V87, P328
[8]  
LUND JW, 1968, T ASME, V90, P793
[9]   DESIGN PROCEDURES FOR ORIFICE COMPENSATED GAS JOURNAL BEARINGS BASED ON EXPERIMENTAL-DATA [J].
PINK, EG ;
STOUT, KJ .
TRIBOLOGY INTERNATIONAL, 1978, 11 (01) :63-75
[10]   Experimental and CFD study on the mass flow-rate characteristic of gas through orifice-type restrictor in aerostatic bearings [J].
Renn, JC ;
Hsiao, CH .
TRIBOLOGY INTERNATIONAL, 2004, 37 (04) :309-315