Management of composition cathodic products in the electrolysis of molybdenum-, tungsten- and carbon-bearing halogenide-oxide and oxide melts

被引：3
作者：
Malyshev, V. V. [1 ]
Soloviev, V. V. [2 ]
Chernenko, L. A. [2 ]
Rozhko, V. N. [2 ]
机构：
[1] Ukrainian Acad Sci, Vernadskii Inst Gen & Inorgan Chem, UA-03142 Kiev, Ukraine
[2] Poltava Natl Tech Yuri Kondratyuk Univ, UA-36011 Poltava, Ukraine
来源：
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK | 2015年 / 46卷 / 01期
关键词：
high-temperature electrochemical synthesis; cathode products; oxides of molybdenum (VI); oxides of tungsten (VI); diagram of compositions of cathode products;
D O I：
10.1002/mawe.201400331
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
It is shown that the cathode products of electrolysis of melts based on a eutectic mixture of sodium chloride and lithium fluoride as well as melts based on sodium tungstate in which dissolved oxides of molybdenum (VI) or tungsten (VI), molybdate, tungstate and lithium or sodium carbonates are molybdenum, tungsten, their bronzes and carbides, carbon. It is established that the phase composition of electrolysis products is determined by the concentration of carbonate in the melt. Particular conditions of plating coating of molybdenum and tungsten carbides on carbon, nickel and copper materials are determined. Molybdenum carbide coatings of electrolyte Na2WO4-Li2MoO4-Li2CO3 are deposited at equality (within 2.5mol%) of concentrations molybdate and lithium carbonate. However, their concentrations should not exceed 10 mol%. At lower concentrations of molybdate in the precipitate are detected carbon, molybdenum, molybdenum carbide, and at high concentrations - molybdenum oxides. At lower concentrations of carbonate in the sediment dominates molybdenum and at large concentrations mainly free carbon is released. More affordable industrial reagent-source of molybdenum is its oxide.
引用
收藏
页码：5 / 9
页数：5
相关论文
共 15 条
  • [1] Afonichkin V.K., 1993, ELEKTROKHIMIYA, V29, P341
  • [2] Superplasticity and high temperature deformation behaviour in nano grain tungsten compacts
    Ameyama, K.
    Oda, E.
    Fujiwara, H.
    [J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2008, 39 (4-5) : 336 - 339
  • [3] Baraboshkin A.N., 1976, ELECTROCRYSTALLIZATI
  • [4] BehrDr-Ing W., 2007, MATERIALWISSENSCHAFT, V7, P504
  • [5] Gurin V. N., 1972, RUSS CHEM REV, V4, P616
  • [6] Hvatov A. Y., 1985, ELEKTROKHIMIYA, V21, P1657
  • [7] Kosolapova T. Y., 1986, METALLURGY
  • [8] Lovering DG., 1982, Molten salt technology
  • [9] Initial stages of nucleation of molybdenum and tungsten carbide phases in tungstate-molybdate-carbonate melts
    Malyshev, V.
    Gab, A.
    Gaune-Escard, M.
    [J]. JOURNAL OF APPLIED ELECTROCHEMISTRY, 2008, 38 (03) : 315 - 320
  • [10] Electrodeposition of tungsten and molybdenum carbide onto the surfaces of disperse dielectric and semiconductor materials
    Malyshev, V. V.
    Gab, A. I.
    Pisanenko, A. D.
    Soloviev, V. V.
    Chernenko, L. A.
    [J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2014, 45 (01) : 51 - 56
12