Bearing fault diagnosis of a permanent magnet synchronous motor via a fast and online order analysis method in an embedded system

A permanent magnet synchronous motor (PMSM) is a typical electromechanical system widely used in industrial automation. Bearing fault diagnosis is necessary because a bearing is a key and vulnerable component in a PMSM. Order analysis (OA) methods, which include tachometer-based OA and tacholess OA methods, have been proven to be effective tools for diagnosing bearing fault under variable speed conditions. However, tachometer based OA methods require the installation of an external sensor to obtain rotating speed, whereas tacholess OA methods are usually complicated and require massive computation cost. Traditional OA methods cannot diagnose bearing fault conveniently and timely because of such deficiencies. Thus, a novel fast and online OA (FOOA) method is proposed to realize variable-speed PMSM bearing fault diagnosis in this study. The FOOA method consists of two algorithms. (1) The rotating phase information is extracted from the sinusoidal current of the PMSM, and a series of equal-phase sampling pulses are generated. (2) The bearing signal acquired from a microphone is angular resampled based on the equal phase sampling pulses. The resampled signal is demodulated, and the envelope order spectrum is calculated for bearing fault identification. The two algorithms are executed sequentially by two micro controller units operating in parallel. Thus, they can be implemented in an embedded system for online fault diagnosis. The effectiveness and flexibility of the proposed FOOA method are validated on both a desktop computer and an embedded system to diagnose different types of defective bearings that are installed on a PMSM test rig. (C) 2017 Elsevier Ltd. All rights reserved.