Composition Design and Properties Characterization of Laser-Cladded Ni51.6Ti34.4Cu14 Coating on AZ91D Magnesium Alloy

被引：3
作者：
Jiang, Lipeng [1 ]
Cui, Xiufang [1 ,2 ]
Jin, Guo [1 ,2 ]
Zhang, Dan [1 ]
Lu, Bingwen [3 ]
Wen, Xin [1 ]
Zhang, Xuerun [1 ]
Wan, Simin [1 ]
机构：
[1] Harbin Engn Univ, Coll Mat Sci & Chem Engn, Inst Surface Interface Sci & Technol, Key Lab Superlight Mat & Surface Technol,Minist E, Harbin 150001, Peoples R China
[2] Harbin Engn Univ, Coll Mat Sci & Chem Engn, 145 Nantong Ave, Harbin 150001, Peoples R China
[3] Guangdong Acad Sci, Inst New Mat, Natl Engn Lab Modern Mat Surface Engn Technol, Key Lab Guangdong Modern Surface Engn Technol, Guangzhou 510650, Peoples R China
来源：
ADVANCED ENGINEERING MATERIALS | 2022年 / 24卷 / 09期
基金：
中国国家自然科学基金;
关键词：
corrosion resistance; laser cladding; magnesium alloy; Ni-Ti-Cu alloy; wear resistance; CORROSION-RESISTANCE; WEAR-RESISTANCE; SOLIDIFICATION BEHAVIOR; CONVERSION COATINGS; MICROSTRUCTURE; ELECTRODEPOSITION; EVOLUTION; TI;
D O I：
10.1002/adem.202101709
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The bottleneck challenge of laser-cladded coating preparation of magnesium alloys is the low melting point of alloys. This greatly restricts the selection of coating material. In this article, the composition of Ni-Ti-Cu coating is designed by cluster line criterion, and the thermal properties of the coating are simulated by JMatPro software. Through the analysis of simulation results, the Ni51.6Ti34.4Cu14 coating is selected and successfully prepared on AZ91D magnesium alloy via laser cladding technology. Then the microstructure, wear resistance, and corrosion resistance of the coating are studied in detail. The results of X-Ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), and transmission electron microscope (TEM) demonstrated that there is a good metallurgical bond between the coating and the substrate, and the coating is mainly composed of Ni3Ti, TiNi0.8Cu0.2, and (Cu, Ni) solid solution phases. Also, there are no obvious pores and crack defects in the coating. Remarkably, AZ91D alloy showed significant improvement in corrosion resistance and wear resistance. Among them, the wear volume of the coating is decreased by 71.9% than that of AZ91D alloy. In particular, the corrosion current density of the coating is three orders of magnitude lower than that of AZ91D alloy.
引用
收藏
页数：13
相关论文
共 60 条
[1]   DIFFERENT BEHAVIOUR OF HEXAGONAL + CUBIC METALS IN THEIR FRICTION WEAR + WORK HARDENING DURIING ABRASION [J].
ALISON, PJ ;
WILMAN, H .
BRITISH JOURNAL OF APPLIED PHYSICS, 1964, 15 (03) :281-&
[2]   Microstructural evolution and properties analysis of laser surface melted and Al/SiC cladded magnesium-rare earth alloys [J].
Arthanari, Srinivasan ;
Li, Yuhang ;
Nie, Lu ;
Guan, Yingchun ;
Yang, Shoufeng .
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 848
[3]   Study on laser cladding and properties of AZ63-Er alloy for automobile engine [J].
Bu, Ren ;
Anxing, Jin ;
Sun, Qi ;
Zan, Wen ;
He, Ruiling .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03) :5154-5160
[4]  
Buckley DH, 1981, SURFACE EFFECTS ADHE
[5]   The influence of stacking fault energy on the wear resistance of nickel base alloys [J].
Chaudhuri, DK ;
Xie, D ;
Lakshmanan, AN .
WEAR, 1997, 209 (1-2) :140-152
[6]   Laser cladding of Mg20Al80 powder on ZM5 magnesium alloy [J].
Chen, C. J. ;
Wang, M. C. ;
Wang, D. S. ;
Jin, R. ;
Liu, Y. M. .
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2007, 42 (02) :130-136
[7]   Effects of electric parameters on microstructure and properties of MAO coating fabricated on ZK60 Mg alloy in dual electrolyte [J].
Chen Jing ;
Wang Zexin ;
Lu Sheng .
RARE METALS, 2012, 31 (02) :172-177
[8]   A comparative study of Ni-Ti and Ni-Ti-Cu shape memory alloy processed by plasma melting and injection molding [J].
de Araujo, C. J. ;
da Silva, N. J. ;
da Silva, M. M. ;
Gonzalez, C. H. .
MATERIALS & DESIGN, 2011, 32 (10) :4925-4930
[9]   0 Effect of cupric sulfate on the microstructure and corrosion behavior of nickel-copper nanostructure coatings synthesized by pulsed electrodeposition technique [J].
Do, Quangquan ;
An, Hongze ;
Wang, Guoxing ;
Meng, Guozhe ;
Wang, Yangqiu ;
Liu, Bin ;
Wang, Junyi ;
Wang, Fuhui .
CORROSION SCIENCE, 2019, 147 :246-259
[10]   Cluster-based composition rules for ternary alloy systems [J].
Dong, Chuang ;
Wang, Qing ;
Chen, Weirong ;
Zhang, Qingyu ;
Qiang, Jianbing ;
Wang, Yingmin .
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2007, 14 :1-3
123456