Fabrication and performance evaluation of waste cotton and polyester fiber-reinforced green composites for building and construction applications

被引：22
作者：
Kamble, Zunjarrao [1 ]
Behera, Bijoya Kumar [1 ]
机构：
[1] Indian Inst Technol Delhi, Dept Text & Fibre Engn, New Delhi 110016, India
来源：
POLYMER COMPOSITES | 2021年 / 42卷 / 06期
关键词：
compression molding; mechanical properties; textile waste; thermal analysis; upcycling; MECHANICAL-PROPERTIES; WATER-ABSORPTION; TEXTILE WASTE; MOISTURE ABSORPTION; BEHAVIOR; RECOVERY;
D O I：
10.1002/pc.26036
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
This research reports thermoset composites reinforced with cotton and polyester fibers (recovered from pre-consumer textile waste). The carded web of cotton and polyester fibers and epoxy resin were used to develop the composites using the compression molding technique. The polyester/epoxy composites show average tensile and impact strength higher than cotton/epoxy composites. However, cotton/epoxy composites show average flexural strength higher than polyester/epoxy composites. The bearing strength in a pinned joint for polyester/epoxy composites is higher than cotton/epoxy composites. The equilibrium water content of polyester/epoxy composites was found much less than the corresponding cotton/epoxy composite. The cotton/epoxy and polyester/epoxy composites are thermally stable enough.
引用
收藏
页码：3025 / 3037
页数：13
相关论文
共 53 条
  • [1] Dynamic mechanical analysis and effects of moisture on mechanical properties of interwoven hemp/polyethylene terephthalate (PET) hybrid composites
    Ahmad, M. A. A.
    Majid, M. S. Abdul
    Ridzuan, M. J. M.
    Mazlee, M. N.
    Gibson, A. G.
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2018, 179 : 265 - 276
  • [2] Mechanical, morphological, and water absorption properties of a new hybrid composite material made from 4 harness satin woven carbon fibres and flax fibres in an epoxy matrix
    Al-Hajaj, Zainab
    Zdero, Radovan
    Bougherara, Habiba
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, 115 : 46 - 56
  • [3] Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites
    Alamri, H.
    Low, I. M.
    [J]. POLYMER TESTING, 2012, 31 (05) : 620 - 628
  • [4] [Anonymous], 2014, WOOD PANEL IND FEDER
  • [5] Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite
    Athijayamani, A.
    Thiruchitrambalam, M.
    Natarajan, U.
    Pazhanivel, B.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2): : 344 - 353
  • [6] Obtainment and characterization of nanocellulose from an unwoven industrial textile cotton waste: Effect of acid hydrolysis conditions
    Avila Dias Maciel, Maisa Milanez
    Coelho de Carvalho Benini, Kelly Cristina
    Cornelis Voorwald, Herman Jacobus
    Hilario Cioffi, Maria Odila
    [J]. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2019, 126 : 496 - 506
  • [7] The Influence of Alkaline Surface Fibre Treatment on the Impact Properties of Sugar Palm Fibre-Reinforced Epoxy Composites
    Bachtiar, D.
    Sapuan, S. M.
    Hamdan, M. M.
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2009, 48 (04) : 379 - 383
  • [8] Béchir W, 2018, TEKST KONFEKSIYON, V28, P14
  • [9] Behera B.K., 2019, P 19 WORLD TEXT C, P1
  • [10] An environmentally friendly thermal insulation material from sunflower stalk, textile waste and stubble fibres
    Binici, Hanifi
    Eken, Mustafa
    Dolaz, Mustafa
    Aksogan, Orhan
    Kara, Mehmet
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2014, 51 : 24 - 33
123456