Pore structures and thermal insulating properties of high Nb containing TiAl porous alloys

被引:33
作者
Wang, Y. H. [1 ]
Lin, J. P. [2 ]
He, Y. H. [3 ]
Zu, C. K. [1 ]
Chen, G. L. [2 ]
机构
[1] China Bldg Mat Acad, Inst Quartz & Special Glasses, Beijing 100024, Peoples R China
[2] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[3] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
关键词
TiAl based alloy; Powder metallurgy; Structure; Thermal insulation property; MICROSTRUCTURES; FABRICATION; AL;
D O I
10.1016/j.jallcom.2009.12.005
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
High Nb containing TiAl alloys have been investigated traditionally as potential high temperature structural materials. Another interesting field where high Nb containing TiAl porous alloys were firstly fabricated by elemental powder metallurgy (EPM) is shown in this study. The effects of fabrication processes on pore structures and thermal insulating properties of Ti-48Al-6Nb porous alloys were investigated. It was found that pores were generated along the resultant skeletons consisting of typical gamma-TiAl/alpha(2)-Ti3Al fully lamellar (FL) microstructure for Ti-48Al-6Nb porous alloys. With the increasing of cold pressures and the fining of particle sizes of Ti and Al elemental powders, the sizes of skeletons and pores for Ti-48Al-6Nb porous alloys decrease. The pore sizes of Ti-48Al-6Nb porous alloys are normal distributions. With the increasing of cold pressures, the pore size distribution curves are in the direction of the smaller pore size and the distribution widths do not basically change. However, the pore size distribution curves become narrower and the peaks of curves move to the left with the fining of particle sizes. Thermal conductivity of Ti-48Al-6Nb porous alloys is a linear function of total porosity and the average pore size at room temperature, respectively. The thermal conductivity linearly increases when the service temperature increases from room temperature to 800 degrees C. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:213 / 218
页数:6
相关论文
共 19 条
  • [11] Madzhidov Kh., 1995, Journal of Engineering Physics and Thermophysics, V68, P649, DOI 10.1007/BF00858066
  • [13] ROTHFAGARASEANU D, 2004, P INT S NIOB HIGH TE, P195
  • [14] Rudajevová A, 1999, PHYS STATUS SOLIDI A, V175, P457, DOI 10.1002/(SICI)1521-396X(199910)175:2<457::AID-PSSA457>3.0.CO
  • [15] 2-7
  • [16] Formation of a submicrocrystalline structure in TiAl and Ti3Al intermetallics by hot working
    Salishchev, GA
    Imayev, RM
    Senkov, ON
    Imayev, VM
    Gabdullin, NK
    Shagiev, MR
    Kuznetsov, AV
    Froes, FH
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 286 (02): : 236 - 243
  • [17] WANG GX, 1992, POWDER METALL INT, V24, P219
  • [18] Effect of fabrication process on microstructure of high Nb containing TiAl alloy
    Wang, Y. H.
    Lin, J. P.
    Xu, X. J.
    He, Y. H.
    Wang, Y. L.
    Chen, G. L.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 458 (1-2) : 313 - 317
  • [19] YE YH, 2007, ADV MATER, V19, P2102