Surface modification of an aramid fiber via grafting epichlorohydrin assisted by supercritical CO2

In order to improve the interface combination property between an aramid fiber (AF) and an epoxy resin matrix, the surface modification of AF with epichlorohydrin (ECH) assisted by supercritical CO2 (ScCO2) was investigated. The fiber surface was characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and dynamic contact angle (DCA) analysis. At the same time, we utilized interfacial shear strength (IFSS) and interlaminar shear strength (ILSS) to characterize the bond strength between the fiber and epoxy resin. An ideal modification effect of the fiber surface was acquired when the fiber treated with ECH in ScCO2 compared with the fiber treated in pure ScCO2. The results showed that ECH could be successfully grafted onto the fiber surface under an anhydrous aluminum chloride (AlCl3) catalyst in ScCO2, and the relative content of oxygen on the fiber surface increased after modification; simultaneously, the morphology of the fiber surface became rougher and the fiber's wettability was upgraded. Finally, the IFSS property of the fiber with the epoxy resin increased, and the ILSS property of the AF-reinforced resin composites was also improved compared with those of the untreated materials.