Finite Element Analysis of sheet metal bending process to predict the springback

被引：82

作者：

Panthi, S. K. ^{[1
]}

Ramakrishnan, N. ^{[2
]}

Ahmed, Meraj ^{[1
]}

Singh, Shambhavi S. ^{[1
]}

Goel, M. D. ^{[1
]}

机构：

[1] AMPRI, Bhopal 462064, India

[2] Indian Sci Lab, GM, Bangalore 560066, Karnataka, India

来源：

MATERIALS & DESIGN | 2010年 / 31卷 / 02期

关键词：

Springback; Sheet metal forming; Minimal load condition; NUMERICAL-SIMULATION; STRAIN; OPTIMIZATION; DESIGN; MODEL;

D O I：

10.1016/j.matdes.2009.08.022

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Springback remains a major concern in sheet metal forming process. Springback, shape discrepancy between fully loaded and unloaded configuration due to elastic recovery of material, is mainly affected by geometrical parameters, material properties of sheet and lubrication condition between the blank and the tool. A total-elastic-incremental-plastic (TEIP) algorithm, for large deformation and large rotational problems, was incorporated in indigenous Finite Element software. This software was used to predict the springback in a typical sheet metal bending process and to investigate the influence of these parameters on springback. The results of simulation are validated with own experiments and published experimental results. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：657 / 662

页数：6

共 38 条

[1] Optimisation of springback predicted by experimental and numerical approach by using response surface methodology [J].

Bahloul, R ;

Ben-Elechi, S ;

Potiron, A .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 173 (01) :101-110

[2]

Bui QV, 2004, J MATER PROCESS TECH, V153, P314, DOI [10.1016/j.jmatprotec.2004.04.342, 10.1016/j.jmatprotec.2004.04.032]

[3] Spatially periodic disturbance rejection with spatially sampled robust repetitive control [J].

Chen, Cheng-Lun ;

Chiu, George T. -C. .

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2008, 130 (02) :0210021-02100211

[4] Finite element investigation on spring-back characteristics in sheet metal U-bending process [J].

Cho, JR ;

Moon, SJ ;

Moon, YH ;

Kang, SS .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 141 (01) :109-116

[5] Finite element analysis and optimization on springback reduction [J].

Chou, IN ;

Hung, CH .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1999, 39 (03) :517-536

[6] DYNAMIC PLANE-STRAIN FINITE-ELEMENT SIMULATION OF INDUSTRIAL SHEET-METAL FORMING PROCESSES [J].

CHOUDHRY, S ;

LEE, JK .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1994, 36 (03) :189-207

[7]

Dieter George Ellwood, 1976, Mechanical metallurgy, V3

[8] Finite element analysis of springback in bending of aluminium sheets [J].

Esat, V ;

Darendeliler, H ;

Gokler, MI .

MATERIALS & DESIGN, 2002, 23 (02) :223-229

[9] Experimental and numerical studies of springback in air v-bending process for cold rolled TRIP steels [J].

Fei, Dongye ;

Hodgson, Peter .

NUCLEAR ENGINEERING AND DESIGN, 2006, 236 (18) :1847-1851

[10] Die design method for sheet springback [J].

Gan, W ;

Wagoner, RH .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2004, 46 (07) :1097-1113

← 1 2 3 4 →