MATERIAL MODEL PARAMETER IDENTIFICATION OF STAINLESS STEEL (AISI 304L)

被引：4

作者：

Jindra, D. ^{[1
]}

Kala, Z. ^{[1
]}

Seitl, S. ^{[2
]}

Kala, J. ^{[1
]}

机构：

[1] Brno Univ Technol, Inst Struct Mech, Veveri 331-95, Brno 60200, Czech Republic

[2] Czech Acad Sci, Inst Phys Mat, Zizkova 22, Brno 61662, Czech Republic

来源：

ENGINEERING MECHANICS 2020 (IM2020) | 2020年

关键词：

Stainless steel; Finite element numerical model; Parameter identification; Ramberg and Osgood model;

D O I：

10.21495/5896-3-246

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Identification of Ramberg and Osgood nonlinear material model parameters for hot rolled stainless steel material grade 1.4307 (AISI 304L) was conducted. Reference data (stress-strain relation) were obtained from experimental program performed on normalized specimens. Parametrical numerical finite element model was created using commercially available software ANSYS classic APDL, and the subsequent optimization process was conducted in the environment of OptiSLang software.

引用

页码：246 / 249

页数：4

共 50 条

[41] A thermo-structural manufacturing process using AISI 304L stainless steel
Towfighi, Siyavash
Romilly, Douglas P.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (02) : 209 - 216
[42] Mechanical properties estimation of AISI 304L stainless steel sheet using SPT
Eduardo Fierro, Victor
Alvarez Villar, Nelson
Wenger, Esteban
Ansaldi, Andrea
Gabarain, Rodrigo
MATERIA-RIO DE JANEIRO, 2018, 23 (02):
[43] Analysis of Fatigue Life and Crack Growth in Austenitic Stainless Steel AISI 304l
Chelbi, Lotfi
Hentati, Fatma
Znaidi, Amna
JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2023, 17 (04): : 501 - 508
[44] Dependence of corrosion properties of AISI 304L stainless steel on the austenite grain size
Sabooni, Soheil
Rashtchi, Hamed
Eslami, Abdoulmajid
Karimzadeh, Fathallah
Enayati, Mohammad Hossein
Raeissi, Keyvan
Ngan, Alfonso Hing Wan
Imani, Reihane Faghih
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2017, 108 (07) : 552 - 559
[45] Evolutions of mechanical properties of AISI 304L stainless steel under shear loading
Zergani, Aqil
Mirzadeh, Hamed
Mahmudi, Reza
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791
[46] IDENTIFICATION AND PROBABILISTIC MODELING OF MESOCRACK INITIATIONS IN 304L STAINLESS STEEL
Rupil, J.
Vincent, L.
Hild, F.
Roux, S.
INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING, 2011, 9 (04) : 445 - 458
[47] Study of microplasticity in 304L stainless steel
Vaucheret, P
Galtier, A
REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 2002, 99 (01): : 63 - 69
[48] Impacts of Traverse Speed and Material Thickness on Abrasive Waterjet Contour Cutting of Austenitic Stainless Steel AISI 304L
Llanto, Jennifer Milaor
Tolouei-Rad, Majid
Vafadar, Ana
Aamir, Muhammad
APPLIED SCIENCES-BASEL, 2021, 11 (11):
[49] Weld Solidification Cracking in 304 to 304L Stainless Steel
Hochanadel, P. W.
Lienert, T. J.
Martinez, J. N.
Martinez, R. J.
Johnson, M. Q.
HOT CRACKING PHENOMENA IN WELDS III, 2011, : 145 - 160
[50] Sensitization evaluation of the austenitic stainless steel AISI 304L, 316L, 321 and 347
A. S. Lima
A. M. Nascimento
H. F. G. Abreu
P. de Lima-Neto
Journal of Materials Science, 2005, 40 : 139 - 144

← 1 2 3 4 5 →