Insight into the Preparation of MgAl-Layered Double Hydroxide (LDH) Intercalated with Nitrates and Chloride Adsorption Ability Study

Featured Application The synthesized MgAl layered double hydroxide (LDH) with strong chloride adsorption ability will have great application potential in the field of corrosion protection. In recent years, layered double hydroxide (LDH) has attracted extensive attention of researchers in the field of corrosion protection due to its unique structure and anion exchange characteristics. However, its chloride adsorption capacity remains to be further optimized to increase its corrosion protection ability. In this work, the influence of reactant concentration on the prepared MgAl-LDH intercalated with nitrates was investigated, and the morphology, composition, and structure were characterized by scanning electronic microscopy/energy dispersive spectrometer (SEM/EDS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD), respectively. The results indicate that the reactant concentration did not have an obvious influence on the particle size and morphology of LDH, while the composition and crystalline structure were changed to some extent. The corresponding reasons were interpreted deeply. The chloride absorption behavior was investigated, and the powder after immersion in NaCl solutions with different concentrations was characterized by XRD to explain the difference in chloride adsorption amounts. The MgAl-LDH powder synthesized at higher concentrations presented excellent chloride adsorption ability with a Qm value of 155.88 mg/g, which was much better than that reported in the literature. This work demonstrated the superior chloride adsorption of the synthesized MgAl-LDH, and it is of great significance for providing a solid foundation and guidance for the industrial application of LDH in the field of corrosion protection in the future.