Peculiarities of detecting pulses of runaway electrons and X-rays generated by high-voltage nanosecond discharges in open atmosphere

Peculiarities of detecting pulses of high-energy runaway electrons and the accompanying X-rays generated by high-voltage nanosecond discharges at high overvoltages in dense gases are discussed. Methods for overcoming difficulties encountered in such measurements are demonstrated. Different techniques for detecting runaway electrons and X-rays generated by discharges in open atmosphere are described, and typical errors that may be done when interpreting measurement results are considered. Experiments with the use of a small-size generator of nanosecond pulses with the idle-running voltage of 250-270 kV and stored energy of similar to 0.5 J have been carried out. It is shown that, in measuring runaway electron pulses by using an experimental configuration with a grid anode, a major portion of the recorded signal is attributed to electromagnetic disturbances. It is found that X-rays are mainly generated due to the deceleration of runaway electrons in the anode, rather than in gas. The number of runaway electrons with energies similar to 300 keV does not exceed 10(9) per shot, and the X-ray dose is 60-200 mu R/shot, depending on the anode material.