Spur gear generation by shaper cutters

被引：37

作者：

Tsay, CB ^{[1
]}

Liu, WY ^{[1
]}

Chen, YC ^{[1
]}

机构：

[1] Natl Chiao Tung Univ, Dept Mech Engn, Hsinchu 300, Taiwan

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2000年 / 104卷 / 03期

关键词：

spur gear; shaper cutter; mathematical model; protuberance; undercut; optimization;

D O I：

10.1016/S0924-0136(00)00570-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper proposes the computerized tooth profile generation of spur gears cut with shaper cutters. A complete geometrical mathematical model of a spur shaper cutter is proposed, including the protuberance, the involute region and semi-topping. The profiles of standard or non-standard spur gears cut with the shaper cutter are obtained based on the theory of gearing. In addition, the effects of the cutter parameters on the generated tooth profile are investigated and illustrated with computer simulation, while the appropriate shaper cutter parameters corresponding to the required gear profile, are also determined using an optimization method. (C) 2000 Elsevier Science S.A. All rights reserved.

引用

页码：271 / 279

页数：9

共 50 条

[41] APPROACH TO SPUR GEAR DESIGN
MADHUSUDAN, G
VIJAYASIMHA, CR
COMPUTER-AIDED DESIGN, 1987, 19 (10) : 555 - 559
[42] A novel lightweight optimization design of gear shaper
Zheng, Qing-Chun
Lu, Kai-Jie
Zhu, Pei-Hao
Ma, Wen-Peng
Liu, Jing Na
Hu, Ya-Hui
UPB Scientific Bulletin, Series D: Mechanical Engineering, 2019, 81 (04): : 241 - 252
[43] Mathematical model and surface deviation of helipoid gears cut by shaper cutters
Wu, JL
Liu, CC
Tsay, CB
Nagata, S
JOURNAL OF MECHANICAL DESIGN, 2003, 125 (02) : 351 - 355
[44] Helical surfaces of gear cutters backed off
Seucek, I
Opalic, M
Rakamaric, P
STROJARSTVO, 2001, 43 (1-3): : 59 - 64
[45] STRETCHED SHAPER CUTS OVERSIZED GEAR COSTS
不详
METALWORKING, 1969, 25 (03): : 50 - &
[46] Chip forming at slotting with gear shaping cutters
Smolnikov, N. Ja
Tkachenko, I. G.
Agapov, S., I
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2009, (04): : 12 - 14
[47] GEAR SHAVING - USE AND CARE OF SHAVING CUTTERS
STODDART, TA
MACHINERY AND PRODUCTION ENGINEERING, 1969, 115 (2966): : 468 - &
[48] Modeling Material Machining Conditions with Gear-Shaper Cutters with TiN0.85-Ti in Adhesive Wear Dominance Using Machine Learning Methods
Kupczyk, Maciej
Lelen, Michal
Jozwik, Jerzy
Tomilo, Pawel
MATERIALS, 2024, 17 (22)
[49] DEVELOPMENT OF CNC GEAR SHAPER CAPABLE OF NON-CIRCULAR GEAR CUTTING
KATORI, H
NAGAHORI, H
ANDO, T
YOSHINO, K
BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1983, 17 (04): : 283 - 284
[50] DEFORMATION AND STIFFNESS OF SPUR GEAR TEETH AND THEIR INFLUENCE ON GEAR NOISE
Medvecka-Benova, Silvia
SCIENTIFIC JOURNAL OF SILESIAN UNIVERSITY OF TECHNOLOGY-SERIES TRANSPORT, 2015, 89 : 101 - 107

← 1 2 3 4 5 →