Simulation analysis of hydrogen recirculation rates of fuel cells and the efficiency of combined heat and power

The objective of this study was to simulate a proton-electrolyte membrane fuel cell (PEMFC) system, namely a PEMFC stack, an anode gas supply subsystem, an anode gas recovery subsystem, a cathode gas supply subsystem, and a tail gas exhaustion subsystem. In addition, this paper presents an analysis of the efficiency of combined heat and power (CHP) systems. MATLAB and Simulink were employed for dynamic simulation and statistical analysis. The rates of active and the passive anode hydrogen recirculation were considered to elucidate the mechanism of hydrogen circulation. When recovery involved diverse recovery mechanisms, the recirculation rate was affected by the pressure at the hydrogen outlet of the PEMFC system. The greater the pressure was at that outlet, the higher the recovery rate was. In the hydrogen recovery system, when the temperature of the hydrogen supply end remained the same, increasing the temperature of the gas supply end increased the efficiency of the fuel cells; fixing the flow of the hydrogen supply end and increasing the temperature of the hydrogen supply end increased the efficiency of the PEMFC system. A calculation of the efficiency of the recovery system indicated that the thermal efficiency of the fuel cells exceeded 35%, the power generation efficiency exceeded 45%, and the efficiency of the CHP system exceeded 80%. (c) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.