Uniaxial compression testing of polymeric materials

Two methods for uniaxial compression testing were investigated and compared using polypropylene as a model material. An overview of various parameters affecting compression test results is provided with particular emphasis on friction between the specimen and the compression plate. A procedure for the determination of the compressive modulus is introduced and results are shown. To enable the detection of instability associated with friction and barreling and to calculate true stress-true strain curves, the measurement of transverse expansion of the specimen at large strains is necessary. Nominal and true Poisson's ratio values in the pre- and post-yield regime are presented and the resulting true stress-true strain curves are compared and discussed. While in the post-yield regime nominal stress values misleadingly result in strain hardening, significant strain softening was observed using true stress values representing the intrinsic material behavior. (C) 2009 Elsevier Ltd. All rights reserved.