A Retention-Matching Strategy for Method Transfer in Supercritical Fluid Chromatography: Introducing the Isomolar Plot Approach

A strategy to match any retention shifts due to increased or decreased pressure drop during supercritical fluid chromatography (SFC) method transfer is presented. The strategy relies on adjusting the co-solvent molarity without the need to adjust the back-pressure regulator. Exact matching can be obtained with minimal changes in separation selectivity. To accomplish this, we introduce the isomolar plot approach, which shows the variation in molar co-solvent concentration depending on the mass fraction of co-solvent, pressure, and temperature, here exemplified by CO2-methanol. This plot allowed us to unify the effects of the co-solvent mass fraction and density on retention in SFC. The approach, which was verified on 12 known empirical retention models for each enantiomer of six basic pharmaceuticals, allowed us to numerically calculate the apparent retention factor for any column pressure drop. The strategy can be implemented either using a mechanistic approach if retention models are known or empirically by iteratively adjusting the co-solvent mass fraction. As a rule of thumb for the empirical approach, we found that the relative mass fraction adjustment needed is proportional to the relative change in the retention factor caused by a change in the pressure drop. Different proportionality constants were required to match retention in the case of increasing or decreasing pressure drops.