Effects of a three-lobe swirl generator on the thermal and flow fields in a heat exchanging tube: An experimental and numerical approach

被引:33
作者
Jafari, Mohammad [1 ,2 ]
Dabiri, Sadegh [3 ]
Farhadi, Mousa [1 ]
Sedighi, Kurosh [1 ]
机构
[1] Babol Noshirvani Univ Technol, Dept Mech Engn, Babol Sar, Iran
[2] Purdue Univ, Dept Mech Engn, W Lafayette, IN 47907 USA
[3] Purdue Univ, Sch Mech Engn, Dept Agr & Biol Engn, W Lafayette, IN 47907 USA
关键词
Forced convection; Passive heat transfer enhancement; Large Eddy Simulation (LES); Sub-grid scale; Swirling flow; Swirl number; OpenFOAM; PisoFoam; TRANSFER ENHANCEMENT; DECAYING FLOW; TRANSFER AUGMENTATION; SWCNT-NANOFLUID; FLUID-DYNAMICS; CHANNEL; SIMULATION; INSERT;
D O I
10.1016/j.enconman.2017.06.074
中图分类号
O414.1 [热力学];
学科分类号
摘要
The current experimental study primarily focuses on the effects of an injected swirling flow on the thermal performance of the test tube. The swirl generator is a helically twisted tube with a three-lobe cross section. To evaluate the thermal performance of the test tube equipped with the swirl generator, the Nusselt number and the friction factor are considered as the target outcomes. The study is carried out for different values of twist-angle (90 <= theta <= 360) and length (1 <= l <= 4) as the main geometrical parameters of the swirl generator, and the Reynolds number varies from 5000 to 30000. The experimental study is accompanied by a comprehensive Large Eddy Simulation (LES). The generated swirling flow and its dissipation rate along the test tube are numerically investigated in details. The numerical results clarify the potential of the swirl generator to enhance the convection rate. The Smagorinsky approach is used to model the effects of the sub-grid scales on the flow field. The simulation is performed using an open source CFD code named OpenFOAM. The results show that the swirl generator leads to a significant enhancement in Nusselt number accompanied by an acceptable increase in the friction factor. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1358 / 1371
页数:14
相关论文
共 44 条
[1]  
AOUABED H, 1995, EXP FLUIDS, V19, P43, DOI 10.1007/BF00192232
[2]   Numerical investigation of flow and heat transfer in a swirl tube [J].
Biegger, Christoph ;
Sotgiu, Corrado ;
Weigand, Bernhard .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2015, 96 :319-330
[3]   Fluid dynamics and heat transfer investigations of swirling decaying flow in an annular pipe Part 1: Review, problem description, verification and validation [J].
Chen, Baiman ;
Ho, Kelvin ;
Abakr, Yousif Abdalla ;
Chan, Andrew .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 97 :1029-1043
[4]   Fluid dynamics and heat transfer investigations of swirling decaying flow in an annular pipe Part 2: Fluid flow [J].
Chen, Baiman ;
Ho, Kelvin ;
Abakr, Yousif Abdalla ;
Chan, Andrew .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 97 :1012-1028
[5]   Heat transfer in turbulent bubbly flow in vertical channels [J].
Dabiri, Sadegh ;
Tryggvason, Gretar .
CHEMICAL ENGINEERING SCIENCE, 2015, 122 :106-113
[6]   Influence of baffle configurations on flow and heat transfer characteristics of trisection helical baffle heat exchangers [J].
Dong, Cong ;
Chen, Ya-Ping ;
Wu, Jia-Feng .
ENERGY CONVERSION AND MANAGEMENT, 2014, 88 :251-258
[7]  
Eggels JGM., 1994, THESIS
[8]   Heat transfer augmentation by helically twisted tapes as swirl and turbulence promoters [J].
Eiamsa-ard, S. ;
Yongsiri, K. ;
Nanan, K. ;
Thianpong, C. .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2012, 60 :42-48
[9]   Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger [J].
El Maakoul, Anas ;
Laknizi, Azzeddine ;
Saadeddine, Said ;
Ben Abdellah, Abdellatif ;
Meziane, Mohamed ;
El Metoui, Mustapha .
ENERGY CONVERSION AND MANAGEMENT, 2017, 133 :76-86
[10]   Enhancement of laminar and transitional flow heat transfer in tubes by means of wire coil inserts [J].
Garcia, Alberto ;
Solano, Juan P. ;
Vicente, Pedro G. ;
Viedma, Antonio .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (15-16) :3176-3189