Flow and aeroacoustic attributes of highly-heated transitional rectangular supersonic jets

被引:30
作者
Chen, Song [1 ]
Gojon, Romain [2 ]
Mihaescu, Mihai [1 ]
机构
[1] FLOW, KTH Royal Inst Technol, S-10044 Stockholm, Sweden
[2] Univ Toulouse, ISAE SUPAERO, F-31400 Toulouse, France
关键词
Supersonic jet; LES; Aeroacoustic; High temperature; Shock wave; NOISE-REDUCTION; OSCILLATION MODES; TONE GENERATION; ACOUSTIC FIELDS; SIMULATION; AIRCRAFT; NUMBER;
D O I
10.1016/j.ast.2021.106747
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
Heated transitional supersonic jets exhausting from a rectangular nozzle at over-expanded conditions are investigated by Large Eddy Simulations and Ffowcs-Williams and Hawkings acoustic analogy. Four cases with a fixed nozzle pressure ratio but different temperature ratios (TR) of 1.0, 2.0, 4.0, and 7.0 are analyzed. Numerical results show that with the increasing temperature the jet velocity significantly increases, whereas its Reynolds number decreases by about one order of magnitude, which leads to a 30% decrease in the jet potential core length and reduction in the number of shock cells. The increasing temperatures also result in supersonic shear layer convection Mach numbers and consequently Mach wave radiations in the acoustic fields. Pressure skewness and kurtosis factors indicate crackle noise and non-linear propagation effects in high temperatures. For the most heated jet TR 7.0, the Mach wave radiation is identified radiating noise at about 120 degrees, while the large turbulence structure noise at about 150 degrees. Furthermore, the vortex sheet model analysis and the LES data detect the existence of upstream-propagating neutral waves inside jet TR 7.0. The observed screech frequency falls within the range of antisymmetric mode indicating that the highly-heated jet is characterized by an antisymmetric oscillation mode at the screech frequency. (C) 2021 The Author(s). Published by Elsevier Masson SAS.
引用
收藏
页数:16
相关论文
共 61 条
[1]  
Baier F., 2017, 20170932 AIAA
[2]  
Baier F., 2018, 20180012 AIAA
[3]   High-speed jet noise [J].
Bailly, Christophe ;
Fujii, Kozo .
MECHANICAL ENGINEERING REVIEWS, 2016, 3 (01)
[4]   Influence of swirl number on jet noise reduction using flat vane swirlers [J].
Balakrishnan, P. ;
Srinivasan, K. .
AEROSPACE SCIENCE AND TECHNOLOGY, 2018, 73 :256-268
[5]   Influence of nozzle-exit boundary-layer conditions on the flow and acoustic fields of initially laminar jets [J].
Bogey, C. ;
Bailly, C. .
JOURNAL OF FLUID MECHANICS, 2010, 663 :507-538
[6]   Feedback loop and upwind-propagating waves in ideally expanded supersonic impinging round jets [J].
Bogey, Christophe ;
Gojon, Romain .
JOURNAL OF FLUID MECHANICS, 2017, 823 :562-591
[7]   Aircraft noise reduction technologies: A bibliographic review [J].
Casalino, D. ;
Diozzi, F. ;
Sannino, R. ;
Paonessa, A. .
AEROSPACE SCIENCE AND TECHNOLOGY, 2008, 12 (01) :1-17
[8]   Jet-noise reduction by impinging microjets:: An acoustic investigation testing microjet parameters [J].
Castelain, T. ;
Sunyach, A. ;
Juve, D. ;
Bera, J. -C. .
AIAA JOURNAL, 2008, 46 (05) :1081-1087
[9]  
Chen S., 2018, 20183303 AIAA
[10]   EFFECT OF A DENSITY DIFFERENCE ON SHEAR-LAYER INSTABILITY [J].
DAVEY, RF ;
ROSHKO, A .
JOURNAL OF FLUID MECHANICS, 1972, 53 (03) :523-&