Wear of tools coated with various PVD films: Correlation with impact test results by means of FEM simulations

被引：24
作者：
Bouzakis, Konstantinos-Dionysios [1 ]
Mirisidis, Ioannis
Michailidis, Nikolaos
Lili, Eleftheria
Sampris, Anastasios
Erkens, Georg
Cremer, Rainer
机构：
[1] Univ Thessaloniki, Lab Machine Tools & Mfg Engn, Dept Mech Engn, Thessaloniki 54124, Greece
[2] CemeCon AG, D-52146 Wurselen, Germany
来源：
PLASMA PROCESSES AND POLYMERS | 2007年 / 4卷 / 03期
关键词：
coated tools; impact test; milling; wear;
D O I：
10.1002/ppap.200600140
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
The use of appropriate conditions and coatings is an issue of pivotal significance since it affects the overall tool performance in manufacturing processes. This paper introduces a quick and innovative procedure for characterizing the coating cutting performance based on the film impact resistance. A correlation between coating impact resistance and cutting performance under various condotions is established. Depending on the coated tool and the workpiece parameters, there are concrete cutting speed and feed rate regions, which can be effectively detected considering the previously mentioned correlation, leading to an enhanced cutting performance.
引用
收藏
页码：301 / 310
页数：10
相关论文
共 20 条
[11]  
Bunshah R.F., 2001, HDB HARD COATINGS
[12]  
CREMER R, 1997, THIN FILMS COAT ECAS, V97, P963
[13]   Properties and performance of high aluminum containing (Ti,Al)N based supernitride coatings in innovative cutting applications [J].
Erkens, G ;
Cremer, R ;
Hamoudi, T ;
Bouzakis, KD ;
Mirisidis, I ;
Hadjiyiannis, S ;
Skordaris, G ;
Asimakopoulos, A ;
Kombogiannis, S ;
Anastopoulos, J ;
Efstathiou, K .
SURFACE & COATINGS TECHNOLOGY, 2004, 177 :727-734
[14]  
FISCHER H, 2000, EVALUATION MANUAL IN
[15]   Mechanical properties and machining performance of Ti1-xAlxN-coated cutting tools [J].
Hörling, A ;
Hultman, L ;
Odén, M ;
Sjölén, J ;
Karlsson, L .
SURFACE & COATINGS TECHNOLOGY, 2005, 191 (2-3) :384-392
[16]  
KLOCKE F, 1999, CIRP ANN-MANUF TECHN, V42, P515
[17]   A NEW TECHNIQUE FOR TESTING THE IMPACT LOAD OF THIN-FILMS - THE COATING IMPACT TEST [J].
KNOTEK, O ;
BOSSERHOFF, B ;
SCHREY, A ;
LEYENDECKER, T ;
LEMMER, O ;
ESSER, S .
SURFACE & COATINGS TECHNOLOGY, 1992, 54 (1-3) :102-107
[18]   HIGH-TEMPERATURE MICROHARDNESS OF HARD COATINGS PRODUCED BY PHYSICAL AND CHEMICAL VAPOR-DEPOSITION [J].
QUINTO, DT ;
WOLFE, GJ ;
JINDAL, PC .
THIN SOLID FILMS, 1987, 153 :19-36
[19]   Mechanical behavior of (Ti,Al)N coatings exposed to elevated temperatures and an oxidative environment [J].
Schäffer, E ;
Kleer, G .
SURFACE & COATINGS TECHNOLOGY, 2000, 133 :215-219
[20]   Surface treatment of cutting tool substrates [J].
Tonshoff, HK ;
Mohlfeld, A .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1998, 38 (5-6) :469-476
12