Thermomechanical Processing by Laser in Multiphase Steels

被引：1
|
作者：
Palkowski, Heinz [1 ]
Brueck, Anna [1 ]
机构：
[1] Clausthal Univ Technol, Inst Met Met Forming & Proc, Clausthal Zellerfeld, Germany
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2009年 / 24卷 / 10-11期
关键词：
Ageing; Bake hardening effect; Laser processing; Local strengthening; Multiphase steels;
D O I：
10.1080/10426910903032220
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The investigations deal with processes leading to local strengthening effects in multiphase steels. These are characterized by good formability, high strength, and bake hardening (BH) effect. Dual phase (DP) and complex phase (CP) steels have been investigated to examine the effect of thermomechanical processing parameters on local BH ability. For this purpose, local heat treatment by Nd:YAG laser were studied, as well as ageing stability of the adjusted strength. The local heat treatment leads to a local strengthening of the material. The stability of the local effect could be confirmed. Partial heat treatment of multiphase steels by laser seems to open a new field of application for the local use of the BH effect. Potential is given to influence relevant areas only, thus representing a method for energy-saving.
引用
收藏
页码：1147 / 1149
页数：3
相关论文
共 50 条
  • [11] Modelling of damage and failure in multiphase high strength DP and TRIP steels
    Uthaisangsuk, V.
    Prahl, U.
    Bleck, W.
    ENGINEERING FRACTURE MECHANICS, 2011, 78 (03) : 469 - 486
  • [12] Construction of robust superhydrophobic surfaces with an 'armour ' structure on the low-temperature steels by picosecond laser processing
    Chen, Xiaoqiu
    Sun, Shibin
    Wang, Dongsheng
    Li, Junfeng
    Yang, Chuanxiao
    Jiang, Yingchang
    Chang, Xueting
    TRIBOLOGY INTERNATIONAL, 2024, 195
  • [13] Construction of superhydrophobic surfaces with different water adhesion on the low-temperature steels by picosecond laser processing
    Chen, Xiaoqiu
    Sun, Shibin
    Wang, Dongsheng
    Zhu, Xiaojie
    Zhang, Yuliang
    Niu, Shicong
    Li, Junfeng
    Jiang, Yingchang
    Chang, Xueting
    SURFACE & COATINGS TECHNOLOGY, 2024, 477
  • [14] Phase Composition and Tribological Characteristics of the Surface Layers of Carbon Tool Steels after Laser Processing in Air
    A. V. Sidashov
    A. T. Kozakov
    S. I. Yaresko
    N. G. Kakovkina
    D. S. Manturov
    Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 2021, 15 : 350 - 360
  • [15] Phase Composition and Tribological Characteristics of the Surface Layers of Carbon Tool Steels after Laser Processing in Air
    Sidashov, A., V
    Kozakov, A. T.
    Yaresko, S., I
    Kakovkina, N. G.
    Manturov, D. S.
    JOURNAL OF SURFACE INVESTIGATION, 2021, 15 (02): : 350 - 360
  • [16] Cold-rolled multiphase boron steels: microstructure and mechanical properties
    Murari, Fabio Dian
    Vasconcelos da Costa e Silva, Andre Luiz
    de Avillez, Roberto Ribeiro
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2015, 4 (02): : 191 - 196
  • [17] Power Beam Processing of Stainless Steels
    Shanmugarajan, B.
    Buvanashekaran, G.
    CENTURY OF STAINLESS STEELS, 2013, 794 : 332 - 339
  • [18] Evaluation of factors affecting the edge formability of two hot rolled multiphase steels
    Monideepa Mukherjee
    Sumit Tiwari
    Basudev Bhattacharya
    International Journal of Minerals, Metallurgy, and Materials, 2018, 25 : 199 - 215
  • [19] Evaluation of factors affecting the edge formability of two hot rolled multiphase steels
    Mukherjee, Monideepa
    Tiwari, Sumit
    Bhattacharya, Basudev
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2018, 25 (02) : 199 - 215
  • [20] Effect of alloying elements on microstructure and mechanical properties of hot rolled multiphase steels
    Heller, T
    Nuss, A
    IRONMAKING & STEELMAKING, 2005, 32 (04) : 303 - 308
12345