Formation of ordered helium pores in amorphous silicon subjected to low-energy helium ion irradiation

Thin transparent (for transmission electron microscopy, TEM) self-supported Si(001) films are irradiated on the (110) end face by low-energy (E = 17 keV) He+ ions at doses ranging from 5 x 10(16) to 4.5 x 10(17) cm(-2) at room temperature. The TEM study of the irradiated Si films along the ion range shows that an a-Si layer forms in the most heavily damaged region and helium pores (bubbles) with a density of up to 3 x 10(17) cm(-3) and 2-5 nm in diameter nucleate and grow across the entire width of this layer. The growth of nanopores in the a-Si layer is accompanied by their linear ordering into chains oriented along the ion tracks. The absence of pores in the region that remains crystalline and has the maximal concentration of implanted helium is explained by the desorption of helium atoms from the thin film during the irradiation. After annealing at 600degreesC, the volume of immobile pores in the remaining a-Si layer increases owing to the capture of helium atoms from the amorphous matrix. Solid solution is shown to be the prevalent state of the helium implanted into the amorphous silicon. Linear features with a diameter close to 1 nm and density of about 10(7) cm(-1) discovered in the helium-doped a-Si layer are identified as low-energy He+ ion tracks. (C) 2003 MAIK "Nauka/Interperiodica".