Influence of Process Parameters on the Machining Characteristics of Austensite Stainless Steel (AISI 304)

被引：13

作者：

Junaidh, A. P. ^{[1
]}

Yuvaraj, G. ^{[1
]}

Peter, Josephine ^{[1
]}

Bhuvaneshwari, V. ^{[1
]}

Kanagasabapathi ^{[1
]}

Karthik, K. ^{[1
]}

机构：

[1] KPR Inst Engn & Technol, Coimbatore 641047, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 05期

关键词：

Austensite steel; machining properties; surface roughness; cutting force; Chip morphology; CARBIDE TOOLS; MACHINABILITY; BEHAVIOR;

D O I：

10.1016/j.matpr.2018.02.324

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Generally Austensite stainless steel are used as most common stainless steel used in various applications because of easily formable and weldable. But the machining properties of Austensite steel is poor due to inherent properties of low thermal conductivity and high work hardening. In the present work focused on the machining characteristics such as cutting force analysis, surface roughness analysis and chip morphology of Austensite stainless steel investigated with the help of turning operation using uncoated carbide tool, which is processed by four different cutting speeds and three different feeds. Based upon cutting force, chip morphology and the surface roughness, it is finally concluded that the proper selection and control of process variables can significantly improve the machining characteristics of AISI 304 austenitic stainless steel. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：13321 / 13333

页数：13

共 17 条

[1] A STUDY OF THE MACHINING OF CAST AUSTENITIC STAINLESS-STEELS WITH CARBIDE TOOLS [J].

AGRAWAL, S ;

CHAKRABARTI, AK ;

CHATTOPADHYAY, AB .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 52 (2-4) :610-620

[2]

Chandrasekaran H., 1994, CHIP FLOW NOTCH WEAR

[3] Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools [J].

Ciftci, I .

TRIBOLOGY INTERNATIONAL, 2006, 39 (06) :565-569

[4] Wear mechanisms of cemented carbide tools in dry cutting of precipitation hardening semi-austenitic stainless steels [J].

Deng Jianxin ;

Zhou Jiantou ;

Zhang Hui ;

Yan Pei .

WEAR, 2011, 270 (7-8) :520-527

[5] On the microstructure and phase identification of plasma nitrided 17-4PH precipitation hardening stainless steel [J].

Dong, H. ;

Esfandiari, A. ;

Li, X. Y. .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (13) :2969-2975

[6] Behaviour of PVD coatings in the turning of austenitic stainless steels [J].

Fernandez-Abia, A. I. ;

Barreiro, J. ;

Fernandez-Larrinoa, J. ;

Lopez de Lacalle, L. N. ;

Fernandez-Valdivielso, A. ;

Pereira, O. M. .

MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 :133-141

[7]

Groover M.P., 1996, FUNDAMENTALS MODERN

[8] Precipitation hardening in a 12%Cr-9%Ni-4%Mo-2%Cu stainless steel [J].

Hättestrand, M ;

Nilsson, JO ;

Stiller, K ;

Liu, P ;

Andersson, M .

ACTA MATERIALIA, 2004, 52 (04) :1023-1037

[9]

Ihsan K, 2004, MATER DESIGN, V25, P303

[10] Recent developments in stainless steels [J].

Lo, K. H. ;

Shek, C. H. ;

Lai, J. K. L. .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2009, 65 (4-6) :39-104

← 1 2 →