Study of the effect of friction stir processing of the sliding wear behavior of cast NiAl bronze: A statistical analysis

被引：42

作者：

Thapliyal, Shivraman ^{[1
]}

Dwivedi, Dheerendra Kumar ^{[1
]}

机构：

[1] IIT, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

来源：

TRIBOLOGY INTERNATIONAL | 2016年 / 97卷

关键词：

Friction stir processing; Nickel aluminum bronze; Wear; Friction; ALUMINUM BRONZE; MICROSTRUCTURAL MODIFICATION; COPPER; ALLOY; BEARING; FE;

D O I：

10.1016/j.triboint.2016.01.008

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper embodies the findings of a study on the effect of normal load, sliding velocity, and surface temperature on the dry sliding wear behavior of friction stir processed C95500 nickel aluminum bronze (NAB) alloy. Adhesive wear behavior was studied using the pin on disk tribometer as per ASTM G99-04 standard, using two level full factorial approachs. The friction processed (FSPed) surface under study showed lower wear rate than as-cast alloy. The wear rate in both conditions, as-cast as well as FSPed, at high temperature was found lower than the one during ambient temperature condition. The wear mode and operating wear mechanism were assessed through SEM study of the worn surface and wear debris. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：124 / 135

页数：12