Evaluation of Tribological Properties of Carbon Fiber-Reinforced PA6 Composites

被引：13

作者：

Li, J. ^{[1
]}

Xia, Y. C. ^{[1
]}

机构：

[1] Shanghai Second Polytech Univ, Sch Mech & Elect Engn, Shanghai 201209, Peoples R China

来源：

POLYMER COMPOSITES | 2010年 / 31卷 / 03期

关键词：

DRY SLIDING FRICTION; WEAR BEHAVIOR; POLYAMIDE-66; PTFE; TEMPERATURE; RUBBER;

D O I：

10.1002/pc.20836

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

The tribological performance of PA6 and carbon fiber-reinforced polyamide 6 (CF/PA6) under dry sliding condition was examined. Different contents of carbon fibers were employed as reinforcement. All filled and unfilled polyamide 6 composites were tested against CGr15 ball and representative testing was performed. The effects of carbon fiber content on tribological properties of the composites were investigated. The worn surface morphologies of neat PA6 and its composites were examined by scanning electron microscopy and the wear mechanisms were discussed. Moreover, all filled polyamide 6 have superior tribological characteristics to unfilled polyamides 6. The optimum wear reduction was obtained when the content of carbon fiber is 20 vol%. POLYM. COMPOS., 31:536-542, 2010. (C) 2009 Society of Plastics Engineers

引用

页码：536 / 542

页数：7

共 29 条

[1] Friction and wear behavior of polyetherimide composites in various wear modes [J].

Bijwe, J ;

Indumathi, J ;

Rajesh, JJ ;

Fahim, M .

WEAR, 2001, 249 (08) :715-726

[2] Tribological properties of high temperature resistant polymer composites with fine particles [J].

Chang, Li ;

Zhang, Zhong ;

Ye, Lin ;

Friedrich, Klaus .

TRIBOLOGY INTERNATIONAL, 2007, 40 (07) :1170-1178

[3] Morphology and microstructure of polyamide 46 wear debris and transfer film: In relation to wear mechanisms [J].

Cong, Peihong ;

Xiang, Fei ;

Liu, Xujun ;

Li, Tongsheng .

WEAR, 2008, 265 (7-8) :1100-1105

[4] The tribological behaviour of different engineering plastics under dry friction conditions [J].

Feyzullahoglu, Erol ;

Saffak, Zehra .

MATERIALS & DESIGN, 2008, 29 (01) :205-211

[5]

FLOCK J, 1999, WEAR, V304, P225

[6] Experimental and numerical evaluation of the mechanical properties of compacted wear debris layers formed between composite and steel surfaces in sliding contact [J].

Friedrich, K ;

Flöck, J ;

Váradi, K ;

Néder, Z .

WEAR, 2001, 251 :1202-1212

[7] Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites [J].

Fu, Shao-Yun ;

Feng, Xi-Qiao ;

Lauke, Bernd ;

Mai, Yiu-Wing .

COMPOSITES PART B-ENGINEERING, 2008, 39 (06) :933-961

[8] MECHANICS OF SUBSURFACE VOID NUCLEATION IN DELAMINATION WEAR [J].

JAHANMIR, S ;

SUH, NP .

WEAR, 1977, 44 (01) :17-38

[9] Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles [J].

Jiang, Zhenyu ;

Gyurova, Lada Antonova ;

Schlarb, Alois K. ;

Friedrich, Klaus ;

Zhang, Zhong .

COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (3-4) :734-742

[10] Tribological study of peroxide-cured EPDM rubber filled with electron beam irradiated PTFE powder [J].

Khan, M. Sohail ;

Lehmann, D. ;

Heinrich, G. ;

Franke, R. .

WEAR, 2009, 266 (1-2) :200-207

← 1 2 3 →