Permeability of micropore carbon materials based on steady-state pore-scale flow calculations in real 2D and 3D microstructures

被引：2

作者：

Stec, Jakub ^{[1
]}

Tarasiuk, Jacek ^{[2
]}

Wronski, Sebastian ^{[2
]}

Filipek, Robert ^{[1
]}

机构：

[1] AGH Univ Sci & Technol, Fac Mat Sci & Ceram, Al Mickiewicza 30, PL-30059 Krakow, Poland

[2] AGH Univ Sci & Technol, Fac Phys & Appl Comp Sci, Al Mickiewicza 30, PL-30059 Krakow, Poland

来源：

CERAMICS INTERNATIONAL | 2019年 / 45卷 / 14期

关键词：

Modeling; Non-destructive evaluation; Carbon; Refractories; POROUS-MEDIA; FLUID-FLOW; POROSITY; REFRACTORIES; MICROSCOPY; WEAR;

D O I：

10.1016/j.ceramint.2019.05.329

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Permeability of experimental micropore carbon material was investigated based on the solution of steady-state pore-scale flow in geometry representing real material pores in 2D and 3D. Geometries for calculations were created based on the X-ray micro-computed tomography measurements. A numerical solution of the velocity field and the Darcy equation allowed determining the permeability. Results obtained for 2D and 3D geometries were compared. A method of permeability measurements based on the Carman-Kozeny equation for real 2D and 3D microstructures was also investigated and compared with those obtained from the pore-scale flow.

引用

页码：17638 / 17645

页数：8

共 50 条

[41] A SAM-FFT based model for 3D steady-state elastodynamic frictional contacts
Zhang, Xin
Wang, Q. Jane
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2019, 170 : 53 - 67
[42] 2D steady-state general solution and fundamental solution for fluid-saturated, orthotropic, poroelastic materials
Li-Hua Pan
Peng-Fei Hou
Jia-Yun Chen
Zeitschrift für angewandte Mathematik und Physik, 2016, 67
[43] 2D steady-state general solution and fundamental solution for fluid-saturated, orthotropic, poroelastic materials
Pan, Li-Hua
Hou, Peng-Fei
Chen, Jia-Yun
ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, 2016, 67 (04):
[44] Real Time Hand Based Robot Control Using 2D/3D Images
Ghobadi, Seyed Eghbal
Loepprich, Omar Edmond
Ahmadov, Farid
Bernshausen, Jens
Hartmann, Klaus
Loffeld, Otmar
ADVANCES IN VISUAL COMPUTING, PT II, PROCEEDINGS, 2008, 5359 : 307 - 316
[45] Diamond nanothread-based 2D and 3D materials: Diamond nanomeshes and nanofoams
Silveira, Julian F. R., V
Muniz, Andre R.
CARBON, 2018, 139 : 789 - 800
[46] OXIDATION BEHAVIOR OF 2D AND 3D CARBON-CARBON THERMOSTRUCTURAL MATERIALS PROTECTED BY CVD POLYLAYER COATINGS
GOUJARD, S
VANDENBULCKE, L
TAWIL, H
THIN SOLID FILMS, 1994, 252 (02) : 120 - 130
[47] Sensitivity analysis of 2D steady-state shallow water flow. Application to free surface flow model calibration
Guinot, Vincent
Cappelaere, Bernard
ADVANCES IN WATER RESOURCES, 2009, 32 (04) : 540 - 560
[48] Pore-scale study on flow and heat transfer in 3D reconstructed porous media using micro-tomography images
Liu, Zhenyu
Wu, Huiying
APPLIED THERMAL ENGINEERING, 2016, 100 : 602 - 610
[49] Pore-Scale 3D Morphological Modeling and Physical Characterization of Hydrate-Bearing Sediment Based on Computed Tomography
Wu, Peng
Li, Yanghui
Sun, Xiang
Liu, Weiguo
Song, Yongchen
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH, 2020, 125 (12)
[50] Particle-based adaptive coupling of 3D and 2D fluid flow models
Suchde, Pratik
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2024, 429

← 1 2 3 4 5 →