Joining of stainless steel 304L with Zircaloy-4 by diffusion bonding technique using Ni and Ti interlayers

被引：40
作者：
Srikanth, V. [1 ]
Laik, A. [1 ,2 ]
Dey, G. K. [1 ,2 ]
机构：
[1] Bhabha Atom Res Ctr, Mat Sci Div, Bombay 400085, Maharashtra, India
[2] Homi Bhabha Natl Inst, Bombay 400094, Maharashtra, India
来源：
MATERIALS & DESIGN | 2017年 / 126卷
关键词：
Diffusion; Intermetallic compounds; Diffusion zone; Shear strength; MECHANICAL-PROPERTIES; TRANSITION JOINTS; TITANIUM; NICKEL; MICROSTRUCTURE; ALLOY;
D O I：
10.1016/j.matdes.2017.04.037
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A methodology, based on diffusion bonding has been developed, for joining stainless steel (SS) type 304L and Zircaloy-4 using Ni and Ti interlayers. Diffusion bonding was performed in the range of 800 degrees C-900 degrees C under vacuum for different time intervals varying between 30 and 90 min. The bonding parameters were optimized at bonding temperature of 850 degrees C for 60 min duration, when the maximum shear strength of 209 MPa was obtained. The SS 304L/Zircaloy-4 joint interfaces showed the formation of different intermetallics like NiZr2, NiZr, Ni3Ti, NiTi and NiTiZr in layered morphology. The interface of the joint bonded at 900 degrees C showed the formation of Ni-Zr type intermetallics, while those of the joints bonded at 800 degrees C and 850 degrees C showed the presence of Ni-Ti type intermetallics. The phases present on the both SS and Zircaloy fracture surfaces were identified as NiTiZr and NiZr2 for bonding conditions 850 degrees C-60 min and 900 degrees C-30 min, respectively.
引用
收藏
页码：141 / 154
页数：14
相关论文
共 49 条
[1]   Microstructure evolution of diffusion welded 304L/Zircaloy4 with copper interlayer [J].
Aboudi, D. ;
Lebaili, S. ;
Taouinet, M. ;
Zollinger, J. .
MATERIALS & DESIGN, 2017, 116 :386-394
[2]   Diffusion bonding of stainless steel to zircaloy-4 in the presence of a Ta intermediate layer [J].
Ahmad, M ;
Akhter, JI ;
Zaman, Q ;
Shaikh, MA ;
Akhtar, M ;
Iqbal, M ;
Ahmed, E .
JOURNAL OF NUCLEAR MATERIALS, 2003, 317 (2-3) :212-216
[3]   Hardness and microstructural studies of electron beam welded joints of Zircaloy-4 and stainless steel [J].
Ahmad, M ;
Akhter, JI ;
Shaikh, MA ;
Akhtar, M ;
Iqbal, M ;
Chaudhry, MA .
JOURNAL OF NUCLEAR MATERIALS, 2002, 301 (2-3) :118-121
[4]   Diffusion bonding of Ti coated Zircaloy-4 and 316-L stainless steel [J].
Akhter, J. I. ;
Ahmad, M. ;
Ali, G. .
MATERIALS CHARACTERIZATION, 2009, 60 (03) :193-196
[5]   Formation of dendritic structure in the diffusion zone of the bonded Zircaloy-4 and stainless steel 316L in the presence of Ti interlayer [J].
Akhter, JI ;
Ahmad, M ;
Iqbal, M ;
Akhtar, M ;
Shaikh, MA .
JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 399 (1-2) :96-100
[6]   Partial transient liquid phase diffusion bonding of zirconium alloy (Zr-2.5Nb) to stainless steel 321 [J].
Atabaki, M. Mazar ;
Bajgholi, M. E. ;
Dehkordi, E. H. .
MATERIALS & DESIGN, 2012, 42 :172-183
[7]  
Bajgholi ME, 2012, J ADV MAT PROCESS, V1, P51
[8]   SOLID-STATE DIFFUSION REACTION AND FORMATION OF INTERMETALLIC COMPOUNDS IN THE NICKEL-ZIRCONIUM SYSTEM [J].
BHANUMURTHY, K ;
KALE, GB ;
KHERA, SK ;
ASUNDI, MK .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (11) :2897-2903
[9]   Tubular transition joint between zircaloy-2 and stainless steel [J].
Bhanumurthy, K ;
Krishnan, J ;
Kale, GB ;
Fotedar, RK ;
Biswas, AR ;
Arya, RN .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 54 (1-4) :322-325
[10]   TRANSITION JOINTS BETWEEN ZIRCALOY-2 AND STAINLESS-STEEL BY DIFFUSION BONDING [J].
BHANUMURTHY, K ;
KRISHNAN, J ;
KALE, GB ;
BANERJEE, S .
JOURNAL OF NUCLEAR MATERIALS, 1994, 217 (1-2) :67-74
12345