Straw combustion on slow-moving grates - a comparison of model predictions with experimental data

Combustion of straw in grate-based boilers is often associated with high emission levels and relatively poor fuel burnout. A numerical grate combustion model was developed to assist in improving the combustion performance of these boilers. The model is based on a one-dimensional "walking-column" approach and includes the energy equations for both the fuel and the gas accounting for heat transfer between the two phases. The model gives important insight into the combustion process and provides inlet conditions for a computational fluid dynamics analysis of the freeboard. The model predictions indicate the existence of two distinct combustion modes. Combustion air temperature and mass flow-rate are the two parameters determining the mode. There is a significant difference in reaction rates (ignition velocity) and temperature levels between the two modes. Model predictions were compared to measurements in terms of ignition velocity and temperatures for five different combinations of air mass flow and temperature. In general, the degree of correspondence with the experimental data is favorable. The largest difference between measurements and predictions occurs when the combustion mode changes. The applicability to full-scale is demonstrated by predictions made for an existing straw-fired boiler located in Denmark. (C) 2004 Elsevier Ltd. All rights reserved.