Analysis of XPS results of AISI 316L SS electropolished and magnetoelectropolished at varying conditions

被引:55
作者
Hryniewicz, T. [1 ]
Rokosz, K. [1 ]
机构
[1] Koszalin Univ Technol, Div Surface Electrochem, PL-75620 Koszalin, Poland
关键词
AISI 316L SS; Magnetoelectropolishing; Differentiated EP conditions; XPS spectra; Surface film composition; STAINLESS-STEEL FOILS; MAGNETIC-FIELD; SURFACE;
D O I
10.1016/j.surfcoat.2010.02.005
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The aim of the paper is to present the surface film composition formed on AISI 316L stainless steel after electropolishing (EP) and magnetoelectropolishing (MEP) for a wide range of the process conditions. The electropolishing EP process has been performed under natural convection (in still electrolyte), and under a forced convection (moderate stirring below 0.1 m/s), both at the polarization plateaux and much above it. Another series of experiments were carried out on AISI 316L SS samples prepared by MEP at 350 mT. The samples prepared by mechanical abrasive polishing, with the grit size of 1000 served as a reference. The Cr: Fe ratio was also studied for the differently prepared samples and it was found that this ratio was significantly higher for the EP and MEP samples than the mechanically polished one. Based on the results, the selection of proper electropolishing conditions have been formulated. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:2583 / 2592
页数:10
相关论文
共 27 条
  • [21] Keller P, 2004, CORROS SCI, V46, P1939, DOI 10.1016/j.corsci.2003.01.007
  • [22] Khatak HS, 2002, CORROSION AUSTENITIC
  • [23] Okamoto G., 1978, PASSIVITY METALS, P646
  • [24] Sedriks A.J., 1996, CORROSION STAINLESS
  • [25] Passivity breakdown and stress corrosion cracking of stainless steel
    Shibata, Toshio
    [J]. CORROSION SCIENCE, 2007, 49 (01) : 20 - 30
  • [26] Wang Yu-Qing., 2002, Surface Science Spectra, V9, P91, DOI [10.1116/11.20030105, DOI 10.1116/11.20030105]
  • [27] Wang Yu-Qing., 2002, Surface Science Spectra, V9, P99