The importance of electrochemistry-related etching in the gate-groove fabrication for InAlAs/InGaAs HFET's

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/InGaAs heterojunction field-effect transistors (HFET's), The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching, The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching, The existence of an electrochemistry-related etching component. Which arises when the ohmic electrodes are present during recess etchi,g? is considered to be responsible for these behaviors.