Pulsed current GMAW for superior weld quality of austenitic stainless steel sheet

被引：20

作者：

Ghosh, Prakriti Kumar ^{[1
]}

Kulkarni, Shrirang Gurunath ^{[1
]}

Kumar, Manish ^{[1
]}

Dhiman, Harsh Kumar ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Met & Mat Engn, Roorkee 247667, Uttar Pradesh, India

来源：

ISIJ INTERNATIONAL | 2007年 / 47卷 / 01期

关键词：

austenitic stainless steel; P-GMAW; inter granular corrosion; heat input; phi; weld geometry;

D O I：

10.2355/isijinternational.47.138

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The performance of pulsed current gas metal arc welding (P-GMAW) and conventional gas metal arc welding (GMAW) processes in welding of 2.5 mm thin stainless steel sheet at different heat input has been studied. The use of P-GMAW at low heat input has been found superior to the use of GMAW process with respect to significant reduction in intergranular corrosion (IGC) susceptibility along with considerable improvement in some other characteristics of weld joint by maintaining comparable mechanical properties. It was further observed that the IGC, weld geometry and microstructure of P-GMA weld joint are largely governed by pulse parameters, and varies as a function of factor phi, defined as a summarized influence of pulse parameters such as peak current, base current, pulse-off time and pulse frequency. The increase of 0 has been found favourable to reduce IGC, weld geometry along with refinement of the cast (dendritic) structure of weld deposit.

引用

页码：138 / 145

页数：8

共 50 条

[21] Creep behavior of austenitic stainless steel weld metals as a function of ferrite content
Cui, Y.
Lundin, Carl D.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 452 : 284 - 291
[22] The effect of the surface on grain boundary migration in austenitic stainless steel weld metal
Shibata, S
Watanabe, T
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (06): : 1453 - 1458
[23] The effect of the surface on grain boundary migration in austenitic stainless steel weld metal
S. Shibata
T. Watanabe
Metallurgical and Materials Transactions A, 2001, 32 : 1453 - 1458
[24] Direction of grain-boundary migration in the weld metal of an austenitic stainless steel
Shinichi Shibata
Takehiko Watanabe
Metallurgical and Materials Transactions A, 1999, 30 : 621 - 626
[25] Solidification Mechanism of Austenitic Stainless Steel Weld Metals with Primary Ferrite Solidification
Inoue, Hiroshige
Koseki, Toshihiko
TRENDS IN WELDING RESEARCH: PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE, 2013, : 242 - 248
[26] Weld Metal Microstructure Prediction in Laser Beam Welding of Austenitic Stainless Steel
Giudice, Fabio
Sili, Andrea
APPLIED SCIENCES-BASEL, 2021, 11 (04): : 1 - 14
[27] Effect of Heat Input on Geometry of Austenitic Stainless Steel Weld Bead on Low Carbon Steel
Saha M.K.
Hazra R.
Mondal A.
Das S.
Journal of The Institution of Engineers (India): Series C, 2019, 100 (04) : 607 - 615
[28] Parametric Optimization of the GMAW Welding Process in Thin Thickness of Austenitic Stainless Steel by Taguchi Method
Nobrega, Glauco
Souza, Maria Sabrina
Rodriguez-Martin, Manuel
Rodriguez-Gonzalvez, Pablo
Ribeiro, Joao
APPLIED SCIENCES-BASEL, 2021, 11 (18):
[29] Nondestructive evaluation of a crack on austenitic stainless steel using a sheet type induced current and a Hall sensor array
Jongwoo Jun
Jinyi Lee
Journal of Mechanical Science and Technology, 2008, 22 : 1684 - 1691
[30] Nondestructive evaluation of a crack on austenitic stainless steel using a sheet type induced current and a Hall sensor array
Jun, Jongwoo
Lee, Jinyi
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2008, 22 (09) : 1684 - 1691

← 1 2 3 4 5 →