Condition Monitoring of Electrical Machines Using Detection Coils

被引：0
|
作者：
Bethke, Florian [1 ]
Brabetz, Ludwig [1 ]
Ayeb, Mohamed [1 ]
机构：
[1] Univ Kassel, Automot EE Syst, Kassel, Germany
来源：
2019 IEEE 28TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE) | 2019年
关键词：
electrical machines; PMSM; air gap coil; flexible printed circuit; monitoring; ECCENTRICITY;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A novel sensor concept for electrical machines based on flexible printed circuits is proposed. The idea of passive detection coils within the air gap of an electrical machine is picked up and extended by an active excitation and efficient signal processing. It allows for simultaneous measurement of the spatial and temporal distribution of the internal magnetic flux as well as the magnetic reluctance of a rotating machine. A multitude of internal quantities can be derived, such as temperatures in the rotor, eccentricities or centrifugal deformations. The system features high mechanical and electrical robustness and is suitable for installation in common electrical machines. Experimental results are provided to show the sensor concept's practicability.
引用
收藏
页码：261 / 266
页数：6
相关论文
共 50 条
  • [1] Predictive Maintenance of Electrical Machines using Machine Learning and Condition Monitoring Data
    Ragavendiran, S. D. Prabu
    Shahakar, Deepak
    Kumari, D. Suvarna
    Yadav, Ajay Singh
    Arthi, P. M.
    Rajesha, N.
    2024 INTERNATIONAL CONFERENCE ON ADVANCES IN COMPUTING, COMMUNICATION AND APPLIED INFORMATICS, ACCAI 2024, 2024,
  • [2] Condition Monitoring of Electrical Machines and its Relation to Industrial Internet
    Belahcen, Anouar
    Gyftakis, Konstantinos N.
    Martinez, Javier
    Climente-Alarcon, Vicente
    Vaimann, Toomas
    2015 IEEE WORKSHOP ON ELECTRICAL MACHINES DESIGN, CONTROL AND DIAGNOSIS (WEMDCD), 2015, : 233 - 241
  • [3] A KNOWLEDGE-BASED CONDITION MONITORING-SYSTEM FOR ELECTRICAL MACHINES
    POON, HL
    COMPUTERS IN INDUSTRY, 1991, 16 (02) : 159 - 167
  • [4] Measures and technologies to enhance the insulation condition monitoring of large electrical machines
    Nelson, JK
    Azizi-Ghannad, S
    IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2004, 11 (01) : 102 - 112
  • [5] Measurements and monitoring of condition of winding insulations in electrical machines in the industry - own experience
    Plutecki, Zbigniew
    Szymaniec, Slawomir
    PRZEGLAD ELEKTROTECHNICZNY, 2012, 88 (4A): : 56 - 59
  • [6] Current-Based Condition Monitoring of Electrical Machines in Safety Critical Applications
    Habetler, Thomas G.
    PRZEGLAD ELEKTROTECHNICZNY, 2008, 84 (09): : 30 - 34
  • [7] Condition Analysis of Electrical Machines by Thermovision
    Sebok, Milan
    Gutten, Miroslav
    Kucera, Matej
    Korenciak, Daniel
    PRZEGLAD ELEKTROTECHNICZNY, 2020, 96 (08): : 47 - 50
  • [8] A novel industrial wireless sensor network for condition monitoring and fault diagnosis of electrical machines
    School of Information Technology and Electrical Engineering, University of Queensland, Brisbane, Australia
    Aust. J. Electr. Electron. Eng., 2013, 4 (505-514): : 505 - 514
  • [9] Feasibility of Wireless RF Communication inside Rotating Electrical Machines for Condition Monitoring Applications
    Kumar, Padmanabhan Sampath
    Xie, Lihua
    Soong, Boon-Hee
    2016 19TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2016), 2016,
  • [10] Condition Monitoring of Mechanical Faults in Induction Machines from Electrical Signatures: Review of Different Techniques
    Gritli, Y.
    Bellini, A.
    Rossi, C.
    Casadei, D.
    Filippetti, F.
    Capolino, G-A.
    2017 IEEE 11TH INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRICAL MACHINES, POWER ELECTRONICS AND DRIVES (SDEMPED), 2017, : 77 - 84
12345