Joining steel to aluminum alloy by resistance spot welding with a rivet

被引：24
作者：
Qiu, Ranfeng [1 ,2 ]
Wang, Nannan [1 ]
Shi, Hongxin [1 ,2 ]
Cui, Lihu [1 ]
Hou, Longlong [1 ]
Zhang, Keke [1 ,2 ]
机构：
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang, Peoples R China
[2] Collaborat Innovat Ctr Nonferrous Met, Luoyang, Henan Province, Peoples R China
来源：
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2015年 / 106卷 / 01期
关键词：
Resistance spot welding; Aluminum alloy; Steel; Rivet; HIGH-STRENGTH STEEL; SHEETS;
D O I：
10.3139/146.111146
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new joining method, termed resistance spot welding with a rivet, was tried to weld steel to aluminum alloy. Scanning electron microscopy studies of the interfacial microstructures revealed the presence of an FeAl reaction layer at the rivet/aluminum alloy interface, and of FeAl3 at the steel/aluminum alloy interface. A tensile shear load of a maximum of 3.85 kN was obtained at a welding current of 21 kA. The results reveal that resistance spot welding with a rivet is an effective method for joining steel and aluminum alloy.
引用
收藏
页码：60 / 65
页数：6
相关论文
共 50 条
[21]   Novel Dissimilar Spot Welding of Aluminum Alloy and Steel Sheets by Friction Stirring - Friction Anchor Welding of Aluminum Alloy and Steel [J].
Ohishi, Kaoru ;
Sakamura, Masaru ;
Ota, Kohei ;
Fujii, Hidetoshi .
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2014, 32 (01) :1-7
[22]   Joining of steel to aluminum alloy by interface-activated adhesion welding [J].
Watanabe, T ;
Takayama, H ;
Kimapong, K ;
Hotta, N .
THERMEC'2003, PTS 1-5, 2003, 426-4 :4129-4134
[23]   Resistance Spot Welding of Aluminum Alloy and Carbon Steel with Spooling Process Tapes [J].
Shin, Seungmin ;
Park, Dae-Jin ;
Yu, Jiyoung ;
Rhee, Sehun .
METALS, 2019, 9 (04)
[24]   Interfacial characterization of joint between mild steel and aluminum alloy welded by resistance spot welding [J].
Qiu, Ranfeng ;
Shi, Hongxin ;
Zhang, Keke ;
Tu, Yimin ;
Iwamoto, Chihiro ;
Satonaka, Shinobu .
MATERIALS CHARACTERIZATION, 2010, 61 (07) :684-688
[25]   Joint formation mechanism and performance of resistance rivet welding (RRW) for aluminum alloy and press hardened steel [J].
Niu, Sizhe ;
Ma, Yunwu ;
Lou, Ming ;
Zhang, Chaoqun ;
Li, Yongbing .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 286
[26]   Friction stir spot welding of aluminum alloy/steel plate with position-controlled joining equipment [J].
Sugimoto, Yukihiro .
Keikinzoku/Journal of Japan Institute of Light Metals, 2024, 74 (08) :363-368
[27]   Orthogonal Optimization of Resistance Spot Welding Parameters and Microstructure and Mechanical Property of Aluminum Alloy/High Strength Steel Joint [J].
Wang, Lei ;
Che, Yingying ;
Wu, Di ;
Li, Hongmei ;
Sun, Daqian ;
Zhang, Xinge .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (12) :3093-3101
[28]   Orthogonal Optimization of Resistance Spot Welding Parameters and Microstructure and Mechanical Property of Aluminum Alloy/High Strength Steel Joint [J].
Lei Wang ;
Yingying Che ;
Di Wu ;
Hongmei Li ;
Daqian Sun ;
Xinge Zhang .
Transactions of the Indian Institute of Metals, 2021, 74 :3093-3101
[29]   Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate [J].
Qiu, Ranfeng ;
Iwamoto, Chihiro ;
Satonaka, Shinobu .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) :4186-4193
[30]   Investigation of the Welding Capability of Aluminum and Titanium Alloy Sheets with IF Steel Sheets by Resistance Spot Welding Method [J].
Mutlusu, Ozer ;
Ertan, Rukiye .
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2020, 23 (04) :1003-1013
12345