Microstructure evolution and mechanical behaviour of pure aluminium and aluminium alloys processed through constrained groove pressing

被引：1

作者：

Poojitha, Vindala ^{[1
]}

Raghu, T. ^{[2
]}

Pandurangadu, V. ^{[1
]}

机构：

[1] Jawaharlal Nehru Technol Univ Ananthapur, Saradha Nagar 515002, Ananthapuramu, India

[2] Def Met Res Lab, Hyderabad 500058, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷

关键词：

Constrained groove pressing; Aluminium and Aluminium alloys; Mechanical properties; ULTRAFINE-GRAINED MATERIALS; REFINEMENT; SHEETS;

D O I：

10.1016/j.matpr.2019.07.017

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Constrained groove pressing (CGP) is a severe plastic deformation technique for sheet materials resulting in significant microstructural refinement and enhanced mechanical behaviour. CGP involves alternate pressing of sheets between corrugated and flattened dies under the plane strain deformation condition. The applicability of CGP for obtaining fine grained structures has been well documented for various metals and alloys. Processing and characterization of ultra-fine grain structures in aluminium(Al)and its alloys has been a subject of research over a period of time due to their application in wide range of industries such as automobiles aerospace, medical and so on. This study is aimed at reviewing the effect of CGP processing on the microstructural evolution and mechanical behaviour of pure aluminium and few commercially important Al alloy sheets reported in literature. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：2335 / 2344

页数：10

共 50 条

[1] Microstructure development in pure aluminium processed by constrained groove pressing
Drnek, J.
Zrnik, J.
Cieslar, M.
Novy, Z.
KOVOVE MATERIALY-METALLIC MATERIALS, 2006, 44 (05): : 267 - 273
[2] Microstructure and properties of aluminium processed by constrained groove pressing
Zrnik, Jozef
Kovarik, Tomas
Cieslar, Miroslav
NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2, 2008, 584-586 : 535 - 540
[3] Structure development and deformation behaviour of pure aluminium processed by constrained groove pressing
Zrnik, Jozef
Cieslar, Miroslav
Slama, Peter
ALUMINIUM ALLOYS 2014 - ICAA14, 2014, 794-796 : 882 - +
[4] Structural and mechanical behaviour of severe plastically deformed high purity aluminium sheets processed by constrained groove pressing technique
Kumar, S. S. Satheesh
Raghu, T.
MATERIALS & DESIGN, 2014, 57 : 114 - 120
[5] Microstructure evolution in pure aluminium processed by equal channel angular pressing at elevated temperature
Subbarayan, S.
Roven, H. J.
Chen, Y. J.
Skaret, P. C.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2013, 104 (07) : 630 - 636
[6] Experimental and numerical study on effect of constrained groove pressing on mechanical behaviour and morphology of aluminium and copper
Kumar, Subodh
Vedrtnam, Ajitanshu
JOURNAL OF MANUFACTURING PROCESSES, 2021, 67 : 478 - 486
[7] Characterisation of Microstructure, Texture and Mechanical Properties of Pure Aluminium Sheets Severely Deformed by Constrained Groove Pressing and Subsequent Cold Rolling
Poojitha Vindala
T. Raghu
V. Pandurangadu
Transactions of the Indian Institute of Metals, 2023, 76 : 107 - 117
[8] Characterisation of Microstructure, Texture and Mechanical Properties of Pure Aluminium Sheets Severely Deformed by Constrained Groove Pressing and Subsequent Cold Rolling
Vindala, Poojitha
Raghu, T.
Pandurangadu, V
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 76 (01) : 107 - 117
[9] Finite element analysis of the deformation behaviour of pure aluminium in repetitive corrugation-straightening and constrained groove pressing
Rahimi F.
Sadeghi B.M.
Ahmadi M.
Sadeghi, Bagher Mohammad (bmsadeghi@iust.ac.ir), 2018, Inderscience Publishers, 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (32) : 598 - 609
[10] Strain path effects on microstructural evolution and mechanical behaviour of constrained groove pressed aluminium sheets
Kumar, S. S. Satheesh
Raghu, T.
MATERIALS & DESIGN, 2015, 88 : 799 - 809

← 1 2 3 4 5 →