Microstructure and technology research of in-situ synthesis TiN-TiB2/Ni Composite Coating by argon arc cladding

被引：24

作者：

Meng, Junsheng ^{[1
]}

Ji, Zesheng ^{[1
]}

机构：

[1] Harbin Univ Sci & Technol, Sch Mat Sci & Engn, Harbin 150040, Peoples R China

来源：

INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS) | 2013年 / 50卷

关键词：

argon arc cladding; In situ synthesis; TiN-TiB2; microstructure; wear; TENSILE;

D O I：

10.1016/j.phpro.2013.11.040

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

An in situ synthesis method was developed to produce an Ni alloy composite coating reinforced by in situ reacted TiN and TiB2 particles, using argon arc cladding (AAC) with different mass fractions of Ni60 and Ti+BN powders on a 16Mn steel substrate. The microstructure, micro-hardness and wear resistance were investigated using SEM, XRD, Micro-hardness Tester, and Friction and Wear Tester, respectively. The result showed that the main phases of coating were TiN TiB2 (Fe,Cr)23C6 and gamma -Ni. Excellent bonding between the coating and the 16Mn steel substrate is uniform, continuous and almost defect-free and the particles were gradient distributed in the clad coating. The microstructure is different from the outside to the inside in the clad coating. The microhardness showed a gradient variation, with the highest value of 1400HV0.2 and the wear properties of the coating are also improved at the room temperature under normal atmosphere conditions. (C) 2013 The Authors. Published by Elsevier B.V. Open access under CC BY-NC-ND license.

引用

页码：253 / 260

页数：8

共 20 条

[1] In situ synthesis of SiC reinforced MMC surface on AISI 304 stainless steel by TIG surface alloying [J].

Buytoz, S ;

Ulutan, M .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (12-13) :3698-3704

[2] In situ synthesis of TiC-TiB2 reinforced FeCrSiB composite coating by laser cladding [J].

Du, Baoshuai ;

Zou, Zengda ;

Wang, Xinhong ;

Li, Qingming .

SURFACE REVIEW AND LETTERS, 2007, 14 (02) :315-319

[3] TiB2 and TiC stainless steel matrix composites [J].

Farid, Akhtar ;

Guo, Shiju ;

Cui, Feng-e ;

Feng, Peizhong ;

Lin, Tao .

MATERIALS LETTERS, 2007, 61 (01) :189-191

[4] Oxidation of TiB2 powders below 900 degrees C [J].

Kulpa, A ;

Troczynski, T .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1996, 79 (02) :518-520

[5] Tensile and wear behaviour of in situ Al-7Si/TiB2 particulate composites [J].

Kumar, S. ;

Chakraborty, M. ;

Sarma, V. Subramanya ;

Murty, B. S. .

WEAR, 2008, 265 (1-2) :134-142

[6] Self-propagating high-temperature synthesis of composite material TiB2-Fe [J].

Lepakova, OK ;

Raskolenko, LG ;

Maksimov, YM .

JOURNAL OF MATERIALS SCIENCE, 2004, 39 (11) :3723-3732

[7] Fabrication of in situ TiB2 reinforced steel matrix composite by vacuum induction melting and its microstructure and tensile properties [J].

Li, B. H. ;

Liu, Y. ;

He, L. ;

Cao, H. ;

Gao, S. J. ;

Li, J. .

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2010, 23 (04) :211-215

[8]

Mettam G.R., 1999, Introduction to the Electronic Age, P281

[9]

RAMBERG JR, 1985, J AM CERAM SOC, V68, pC78, DOI 10.1111/j.1151-2916.1985.tb09637.x

[10]

Rie K T, 1997, SURF COAT TECH, V97, P425

← 1 2 →