Experimental Determination of Phase Equilibria in Fe-Cr-Ni-Al System

被引:1
作者
Ojha, Rohit [1 ,2 ]
Helander, Thomas [3 ]
Kumar, K. C. Hari [2 ]
机构
[1] Sandvik Mat Technol, Old Mumbai Pune Rd, Pune 411012, Maharashtra, India
[2] Indian Inst Technol Madras, Dept Met & Mat Engn, Chennai 600036, Tamil Nadu, India
[3] Kanthal AB, S-73427 Hallstahammar, Sweden
关键词
CALPHAD; differential scanning calorimetry (DSC); experimental phase equilibria; quaternary; thermodynamic computations; CREEP-BEHAVIOR; PRECIPITATION;
D O I
10.1007/s11669-021-00896-8
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Alloys Fe-18Cr-9Ni-3Al, Fe-16Cr-18Ni-5Al, and Fe-20Cr-20Ni-5Al wt.% were prepared by vacuum arc melting and heat treated at 600 degrees C/514 days, 800 degrees C/56 days, 1000 degrees C/32 days, and 1100 degrees C/15 days. The microstructures of the samples were characterized to identify the equilibrium phases at each temperature. The compositions of the phases were measured with SEM-EDS. Solidus and liquidus were determined using DSC. The experimental results were compared with equilibrium thermodynamic calculations. Significant differences were observed for solidus, solvus temperatures, and compositions of the equilibrium phases.
引用
收藏
页码:428 / 438
页数:11
相关论文
共 27 条
[1]  
Boettinger W.J., 2006, DTA and heat-flux DSC Measurements of Alloy Melting and Freezing
[2]   Development of 1100 A°C Capable Alumina-Forming Austenitic Alloys [J].
Brady, M. P. ;
Muralidharan, G. ;
Yamamoto, Y. ;
Pint, B. A. .
OXIDATION OF METALS, 2017, 87 (1-2) :1-10
[3]   Co-optimization of wrought alumina-forming austenitic stainless steel composition ranges for high-temperature creep and oxidation/corrosion resistance [J].
Brady, M. P. ;
Magee, J. ;
Yamamoto, Y. ;
Helmick, D. ;
Wang, L. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 :101-115
[4]  
Davidson, 1978, RES NEW ALLOYS ELECT
[5]  
Dunning, 1984, SULFIDATION AND OXID, V8856
[6]  
Ek, 2004, IM2004109 SWED I MET
[7]  
Fujioka T., 1976, United States Patent, Patent No. 3989514
[8]   Development of alumina-forming duplex stainless steels as accident-tolerant fuel cladding materials for light water reactors [J].
Kim, Hyunmyung ;
Jang, Hun ;
Subramanian, Gokul Obulan ;
Kim, Chaewon ;
Jang, Changheui .
JOURNAL OF NUCLEAR MATERIALS, 2018, 507 :1-14
[9]  
McGurty J.A., 1978, United States Patent, Patent No. 4086085
[10]   Diffusion couple experiments and calculations in Fe-Cr-Ni-Al system at 800-1000 °C [J].
Ojha, Rohit ;
Kulkarni, Kaustubh ;
Helander, Thomas ;
Kumar, K. C. Hari .
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 863