Parametric optimization of chrome composite through ultrasonic machining using taguchi approach

被引：5
作者：
Saravanan, K. G. [1 ]
Sivapragasam, A. [1 ]
Prabu, R. [2 ]
Maniraj, S. [3 ]
机构：
[1] Sona Coll Technol Autonomous, Dept Mech Engn, Salem 636005, India
[2] Mahendra Engn Coll Autonomous, Dept Mech Engn, Namakkal 637503, India
[3] Paavai Engn Coll Autonomous, Dept Mech Engn, Namakkal 637018, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 45卷
关键词：
Chrome composite; Silicon carbide; XRD test; Taguchi approach; Variance test;
D O I：
10.1016/j.matpr.2020.09.267
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The combination of nickel and chromium has provides better substance properties. In addition to that, the Silicon Carbide (SiC) particulates (weight percentage of 1.50) were mixed to the base alloys to enhance the further substance properties. The tensile strength and density of the composite was increased. The chemical composition was validated through Energy Dispersive Spectroscopy (EDS) test. The chrome composite was drilled by ultrasonic vibrations. The voltage, slurry concentration and abrasive grit size was chosen for control factors. The Material Removal Rate (MRR) was determined through the combinations of control factors. Taguchi approach was used to optimize the ultrasonic machining factors. The factors effects have been discussed through variance test and Pareto chart. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advances in Materials Research-2019.
引用
收藏
页码：1975 / 1978
页数：4
相关论文
共 50 条
  • [41] Synthesis of Cadmium doped CuO thin films via spray pyrolysis and optimization of the optical band gap using Taguchi approach
    Benaissa, N.
    Garmim, T.
    El Jouad, Z.
    Louardi, A.
    Talbi, A.
    Rmili, A.
    El Bachiri, A.
    Nouneh, K.
    Monkade, M.
    MATERIALS CHEMISTRY AND PHYSICS, 2025, 338
  • [42] Tribological behavior prediction of composite MoS2-TiO2 coating using Taguchi coupled artificial neural network approach
    Borgaonkar, Avinash, V
    Ismail, Syed
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (12) : 6835 - 6850
  • [43] Multi-objective optimization of 3D printing process parameters using gray-based Taguchi for composite PLA parts
    Tuncel, Oguz
    Tufekci, Kenan
    Kahya, Caglar
    POLYMER COMPOSITES, 2024, 45 (14) : 12870 - 12884
  • [44] Multi-response optimization in enzymatic desizing of cotton fabric under various chemo-physical conditions using a Taguchi approach
    Rehman, Aisha
    Raza, Zulfiqar Ali
    Masood, Rashid
    Hussain, Muhamamd Tahir
    Ahmad, Naseer
    CELLULOSE, 2015, 22 (03) : 2107 - 2116
  • [45] RETRACTED: Experimental Analysis and Optimization of Tribological Properties of Self-Lubricating Aluminum Hybrid Nanocomposites Using the Taguchi Approach (Retracted Article)
    Selvaraj, Vinoth Kumar
    Jeyanthi, S.
    Thiyagarajan, Raja
    Senthil Kumar, M.
    Yuvaraj, L.
    Ravindran, P.
    Niveditha, D. M.
    Gebremichael, Yigezu Bantirga
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [46] Multi-response optimization in enzymatic desizing of cotton fabric under various chemo-physical conditions using a Taguchi approach
    Aisha Rehman
    Zulfiqar Ali Raza
    Rashid Masood
    Muhamamd Tahir Hussain
    Naseer Ahmad
    Cellulose, 2015, 22 : 2107 - 2116
  • [47] Fractal-like kinetics for adsorption of Pb (II) on graphene oxide/hydrous zirconium oxide/crosslinked starch bio-composite: Application of Taguchi approach for optimization
    Rahman, Nafisur
    Raheem, Abdur
    Al-Kahtani, Abdullah A.
    Pandit, Bidhan
    Ubaidullah, Mohd
    JOURNAL OF KING SAUD UNIVERSITY SCIENCE, 2023, 35 (05)
  • [48] Recovery of levulinic acid by reactive extraction using tri-n-octylamine in methyl isobutyl ketone: Equilibrium and thermodynamic studies and optimization using Taguchi multivariate approach
    Eda, Sumalatha
    Borra, Anoosha
    Parthasarathy, Rajarathinam
    Bankupalli, Satyavathi
    Bhargava, Suresh
    Thella, Prathap Kumar
    SEPARATION AND PURIFICATION TECHNOLOGY, 2018, 197 : 314 - 324
  • [49] Parameter optimization for wire-cut electrical discharge machining of stir cast AA6063 alloy/SiC (black and green) using Taguchi method with grey relational analysis
    Kumar, Raj R.
    Prasanna, Gnana
    Hikku, G. S.
    MATERIALS SCIENCE-POLAND, 2022, 40 (01) : 68 - 83
  • [50] Parametric study and optimization of specific wear of a novel porcine bone reinforced hybrid composite on dry sliding wear apparatus: a RSM based design approach
    Dikshit, Iti
    Bhushan, Gian
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023, 17 (05): : 2361 - 2371
12345