Parametric optimization of chrome composite through ultrasonic machining using taguchi approach

被引：5
作者：
Saravanan, K. G. [1 ]
Sivapragasam, A. [1 ]
Prabu, R. [2 ]
Maniraj, S. [3 ]
机构：
[1] Sona Coll Technol Autonomous, Dept Mech Engn, Salem 636005, India
[2] Mahendra Engn Coll Autonomous, Dept Mech Engn, Namakkal 637503, India
[3] Paavai Engn Coll Autonomous, Dept Mech Engn, Namakkal 637018, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 45卷
关键词：
Chrome composite; Silicon carbide; XRD test; Taguchi approach; Variance test;
D O I：
10.1016/j.matpr.2020.09.267
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The combination of nickel and chromium has provides better substance properties. In addition to that, the Silicon Carbide (SiC) particulates (weight percentage of 1.50) were mixed to the base alloys to enhance the further substance properties. The tensile strength and density of the composite was increased. The chemical composition was validated through Energy Dispersive Spectroscopy (EDS) test. The chrome composite was drilled by ultrasonic vibrations. The voltage, slurry concentration and abrasive grit size was chosen for control factors. The Material Removal Rate (MRR) was determined through the combinations of control factors. Taguchi approach was used to optimize the ultrasonic machining factors. The factors effects have been discussed through variance test and Pareto chart. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advances in Materials Research-2019.
引用
收藏
页码：1975 / 1978
页数：4
相关论文
共 50 条
12345