Parametric optimization of chrome composite through ultrasonic machining using taguchi approach

被引：5
作者：
Saravanan, K. G. [1 ]
Sivapragasam, A. [1 ]
Prabu, R. [2 ]
Maniraj, S. [3 ]
机构：
[1] Sona Coll Technol Autonomous, Dept Mech Engn, Salem 636005, India
[2] Mahendra Engn Coll Autonomous, Dept Mech Engn, Namakkal 637503, India
[3] Paavai Engn Coll Autonomous, Dept Mech Engn, Namakkal 637018, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 45卷
关键词：
Chrome composite; Silicon carbide; XRD test; Taguchi approach; Variance test;
D O I：
10.1016/j.matpr.2020.09.267
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The combination of nickel and chromium has provides better substance properties. In addition to that, the Silicon Carbide (SiC) particulates (weight percentage of 1.50) were mixed to the base alloys to enhance the further substance properties. The tensile strength and density of the composite was increased. The chemical composition was validated through Energy Dispersive Spectroscopy (EDS) test. The chrome composite was drilled by ultrasonic vibrations. The voltage, slurry concentration and abrasive grit size was chosen for control factors. The Material Removal Rate (MRR) was determined through the combinations of control factors. Taguchi approach was used to optimize the ultrasonic machining factors. The factors effects have been discussed through variance test and Pareto chart. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advances in Materials Research-2019.
引用
收藏
页码：1975 / 1978
页数：4
相关论文
共 50 条
  • [21] Comparative Evaluation for Studying the Parametric Influences on Quality of Electrode Using Taguchi Method Coupled with MOORA, DFA, and TOPSIS Method for Electrochemical Machining
    Panda, Surya Narayan
    Bagal, Dilip Kumar
    Pattanaik, Ajit Kumar
    Patnaik, Dulu
    Barua, Abhishek
    Jeet, Siddharth
    Parida, Biswajit
    Naik, Bibekananda
    RECENT ADVANCES IN MECHANICAL INFRASTRUCTURE ( ICRAM 2019), 2020, : 115 - 129
  • [22] A Taguchi approach-based study on effect of process parameters in electro discharge machining using orbital tool movement
    Dave, H.K. (harshitkumar@yahoo.com), 2013, Inderscience Enterprises Ltd., Switzerland (13) : 52 - 66
  • [23] Optimization of processing parameters, physical and mechanical properties of SiC - CNF composites using Taguchi approach
    Mubina, Shaik
    Khanra, Asit Kumar
    Saha, Bhaskar Prasad
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 5300 - 5308
  • [24] Process parameters optimization for friction stir welding of Polypropylene material using Taguchi's approach
    Lenin, K.
    Shabeer, H. Abdul
    Kumar, K. Suresh
    Panneerselvam, K.
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2014, 73 (06): : 369 - 374
  • [25] Optimization of performance and emission characteristics of bio diesel fuelled VCR engine using Taguchi approach
    Prabhahar, M.
    Prakash, S.
    George, Iwin
    Swaroop
    Amith, K. K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 859 - 867
  • [26] Optimizing feed and radial forces in CNC machining of P-20 tool steel through Taguchi's parameter design approach
    Aggarwal, Aman
    Singh, Hari
    Kumar, Pradeep
    Singh, Manmohan
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2009, 16 (01) : 23 - 32
  • [27] Investigation of the role of chemotaxis in bacterial transport through saturated porous media using Taguchi approach
    Biria, D.
    Balouchi, A.
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2013, 436 : 542 - 548
  • [28] Welding Parameter Optimization of Alloy Material by Friction Stir Welding Using Taguchi Approach and Design of Experiments
    Karwande, Amit H.
    Rao, Seeram Srinivasa
    INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONICS, MATERIALS AND APPLIED SCIENCE, 2018, 1952
  • [29] Multi-response optimization in dry turning process using Taguchi's approach and utility concept
    Kumar, Yogendra
    Singh, Hari
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 2142 - 2151
  • [30] Optimization of Mechanical Properties of UV-cut Polyester Fiber Using a Hybrid Taguchi and Fuzzy Approach
    Su, Te-Li
    Kuo, Yu-Lin
    JOURNAL OF ENGINEERED FIBERS AND FABRICS, 2015, 10 (02): : 29 - 39
12345